• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

New wheel stud too short?

US6x4

Well-known member
Steel Soldiers Supporter
1,165
2,028
113
Location
Wenatchee, WA
I got some replacement wheel studs (p/n 7409554) for the left rear axle of my M813 from Erik's Military and they're about 1/4" shorter than the originals. Other sites list this same p/n for both the front & rear but they look like maybe they're fronts only?

Can I run 2 of the 10 studs 1/4" short?
20210503_191103.jpg
 

simp5782

Feo, Fuerte y Formal
Supporting Vendor
12,088
9,248
113
Location
Mason, TN
I got some replacement wheel studs (p/n 7409554) for the left rear axle of my M813 from Erik's Military and they're about 1/4" shorter than the originals. Other sites list this same p/n for both the front & rear but they look like maybe they're fronts only?

Can I run 2 of the 10 studs 1/4" short?
View attachment 833498
Someone had put a 939 stud in the hub at some point. They are longer and come in various forms. Hint as to why you need a shoulder recessed lug nut for HEMTT wheels on an 809 series vs you don't on A 939
 

US6x4

Well-known member
Steel Soldiers Supporter
1,165
2,028
113
Location
Wenatchee, WA
Ok, I'm picking up what you're laying down. My calipers say the new studs match the parttarget.com nominal dimensions for what my NSN should be. The studs (and not just one) must have been replaced before my truck was CARC'd in 2001 because they're painted on the front but are still fresh yellow zinc on the back where the paint doesn't reach. Maybe when I go super singles I can replace these two new studs again and go with standard lug nuts on the rear 😉
20210503_190833.jpg
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks