3D scanning the LMTV rear frame

[Awesomeness]

I just thought I'd share some 3D scanning I was doing today, in preparation for an upcoming project. You'll have to guess what.


If you look closely, you can see some diagonal lines from the top right corner of the pintle box up to the top right (between the marker light and trailer plug). Interestingly, while the scanner picked that up (and they are actually symmetrical on both sides, but hard to see in this image), you can't see them with the naked eye. That's how accurate the scan is!

 

[Jbulach]

…You'll have to guess what…

If you look closely, you can see some diagonal lines from the top right corner of the pintle box up to the top right (between the marker light and trailer plug). Interestingly, while the scanner picked that up (and they are actually symmetrical on both sides, but hard to see in this image), you can't see them with the naked eye. That's how accurate the scan is!

Receiver hitch?

Diagonal lines look like warpage from welds on the other side.

 

[Awesomeness]

Diagonal lines look like warpage from welds on the other side.

Yeah, that's what they are. I just thought it was cool to point out, for those who are wondering how accurately it scans.

 

[Third From Texas]

You'll have to guess what

You're adding a snowcone machine to the back!!!!!!

 

[Awesomeness]

You're adding a snowcone machine to the back!!!!!!

Nah, that fits in the receivers for the helicopter lifting bars!

 

[Ronmar]

Thats cool, what scanner are you using?

 

[Awesomeness]

Thats cool, what scanner are you using?

I have one of these Peel2 scanners. https://peel-3d.com/products/peel-2?variant=33046758555671

It's really a Creaform GoScan 50, rebadged.

 

[Ronmar]

I have one of these Peel2 scanners. https://peel-3d.com/products/peel-2?variant=33046758555671

It's really a Creaform GoScan 50, rebadged.

Well if it can read weld deformities thru the steel, thats saying something for the resolution… Neet tool!