JG Sky Soldier
New member
- 17
- 5
- 3
- Location
- Decatur, AL
Does anyone know a source for the CUCV Air Condition compressor engine mounting brackets and pulleys ?? Thanks
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Air Compressor engine mounting brackets
- Thread starter JG Sky Soldier
- Start date
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
CUCVs didn't come with compressors, except the M1010, and you'll get a lot of confused replies. Probably just easier to ask for the compressor bracket for the M1010.
To answer your question, you can find the part number in the TM.
-10, -20(p), -34(p) are what you want.
JATONKA's CUCV TM download page
JATONKA's CUCV Technical Manual DOWNLOAD PAGE where users can download essential Technical manuals for the M1009 m1008 m1010 m1028 m1031
www.jatonkam35s.com
- 1,653
- 1,669
- 113
- Location
- Nova Laboratories, WA
All found in the -20p... Which, funny enough, don't have the bracket part numbers...
Must be classified...
Must be classified...
cucvrus
Well-known member
- 11,473
- 10,434
- 113
- Location
- Jonestown Pennsylvania
May I suggest just looking in a salvage yard for a civilian 6.2 diesel vehicle that had A/C. Below I pictured an M1010 engine from a quick image search.
As I recall and that is a long time ago. The civilian trucks had the same brackets.
This was a quick Google search to refresh my memory but yes the brackets were similar. I always liked the nice civilian P/S reservoir vs the CUCV jamb your hand down in there set up. Good Luck. I scrapped many of these old trucks over the years and the parts were abundant at the time everyone had them.
As I recall and that is a long time ago. The civilian trucks had the same brackets.
This was a quick Google search to refresh my memory but yes the brackets were similar. I always liked the nice civilian P/S reservoir vs the CUCV jamb your hand down in there set up. Good Luck. I scrapped many of these old trucks over the years and the parts were abundant at the time everyone had them.
JG Sky Soldier
New member
- 17
- 5
- 3
- Location
- Decatur, AL
Thank You for your reply.... I have a complete set of M1010 compressor brackets (Spare M1010 for parts).. However at 79 years young I am having to except that I will not get to all my projects.... I have someone interested in buying them and I am trying to arrive at a reasonable price...I was told that "Someone" was reproducing them.... I am not aware of any... Has anyone? Any idea of what they are worth?? Thanks!
LT67
Well-known member
- 655
- 501
- 93
- Location
- Bowdon, GA
Vintage Air AC systems