Trying to install a replacement gauge cluster on my 07 humvee 1165 with the electronic speedo but it came butchered from gov planet. The wires were cut and number tags are missing, does anyone have a wiring diagram for the cluster. Also which terminal would be the positive terminal on the back of each gauge?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Humvee gauge cluster
- Thread starter jim1131
- Start date
The whole vehicle was gutted, I have been working on it all year but its starting to look great.
papakb
Well-known member
- 2,285
- 1,188
- 113
- Location
- San Jose, Ca
Wiring diagram is in the back of the TM 9 2320-280-20-3 manual. They're the same so any one will do
couldnt find it for the gauges
- 713
- 987
- 93
- Location
- Southern Minnesota
Starts on page 1159 of the copy I have. The gauge part is snipped below. You'll have to figure out which wires are which since your tags are missing, but you should be able to trace them back to the control harness and other harnesses, it's just time consuming.
Action
Well-known member
- 3,576
- 1,559
- 113
- Location
- East Tennessee
You can also use the parts manual in the wiring harness section to see what wires are in each branch of the harness, and to see what teminal should be on the end.
The maintenance TM will tell you and show in diagrams which number goes into which plug on the back of gauges.
The maintenance TM will tell you and show in diagrams which number goes into which plug on the back of gauges.