- 1,215
- 2,165
- 113
- Location
- Wenatchee, WA
My 90° elbow hose finally arrived - it's a Gates 28466 which starts out at about 4" x 6". I trimmed off about 2" per end and it went on like a glove ![Beaming face with smiling eyes :grin: 😁](https://cdn.jsdelivr.net/gh/joypixels/emoji-assets@5.0/png/64/1f601.png)
I cranked it up and idled it for awhile until the filter got warm. Only two leaks to tighten and everything is running good! I'll be running it like this for the next several outings and then I'll change the filter, remove the two pipe plugs and hook up the heater hoses.
![20211015_152309.jpg 20211015_152309.jpg](https://www.steelsoldiers.com/data/attachments/603/603335-fa32edd5e48bf08bcde380b4b7cd6775.jpg)
![20211015_154458.jpg 20211015_154458.jpg](https://www.steelsoldiers.com/data/attachments/603/603336-0459b6611d50bba913aab4e999df1262.jpg)
![Beaming face with smiling eyes :grin: 😁](https://cdn.jsdelivr.net/gh/joypixels/emoji-assets@5.0/png/64/1f601.png)
I cranked it up and idled it for awhile until the filter got warm. Only two leaks to tighten and everything is running good! I'll be running it like this for the next several outings and then I'll change the filter, remove the two pipe plugs and hook up the heater hoses.
![20211015_152309.jpg 20211015_152309.jpg](https://www.steelsoldiers.com/data/attachments/603/603335-fa32edd5e48bf08bcde380b4b7cd6775.jpg)
![20211015_154458.jpg 20211015_154458.jpg](https://www.steelsoldiers.com/data/attachments/603/603336-0459b6611d50bba913aab4e999df1262.jpg)