- 333
- 740
- 93
- Location
- Quincy, FL
LOL! Easy for you. I should have known that you would have all of the data at your finger tips. Thanks G. =)
Looks like I need to find a 1.3" solution.
Looks like I need to find a 1.3" solution.
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Thanks 11echo. I sent you a pm late last night regarding a full sized version of the picture below.
View attachment 865036
I stayed up far too late reading old threads and doing searches. I finally ran across the original thread by silverstate55 where he covered this build. Unfortunately all of his posts were marked as - Edited for inappropriate language - so all of the information and photos were gone.
Happy Easter gentlemen. =)
Richard
FTM, it can't be 105" unless tire bulge played a role - if measured about 4" above (hard)ground. Otherwise it's 103.3" (+/- 1/4", depending on tire brand).Looks like 8'-9" overall width. I will need to drop 3" to be legal.
I'll take any photos I can get. Always good for inspiration. It's too bad that the original posts were deleted. I saw where someone had quoted one of the deleted posts and I didn't see any bad language used in it. Hard to say what went on there.Will this do ?
I was just posting what had been stated in another thread. Any numbers other than the ones you have given I'm taking with a grain of salt. Once my trailer is back and I can take my own measurements first hand I'll know what I'm up against.FTM, it can't be 105" unless tire bulge played a role - if measured about 4" above (hard)ground. Otherwise it's 103.3" (+/- 1/4", depending on tire brand).