• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Do I need all these wires?

DEA AK

Active member
163
88
28
Location
Palos Verdes Estates, CA
Hi,

I just got a 2003 M1097A2 and of course it has the big block of stuff where the positive wire connects and then there are smaller wires on different battery cables, and other runs that are connected and some that are just cut off.

All I want is the HMMWV to run, I don't want to add any extra stuff to it (not at this time anyway).

do I need all the smaller wires connected around the battery bay?

There is one from the positive terminal (connected to the body under the rubber glob... it's just cut off - I assume I need to CAP it or some how remove it so it doesn't short out?

I am new to all this electronics stuff so I wanted to ask.

Thank you,
David
 

Mullaney

Well-known member
Steel Soldiers Supporter
Supporting Vendor
7,716
19,766
113
Location
Charlotte NC
Hi,

I just got a 2003 M1097A2 and of course it has the big block of stuff where the positive wire connects and then there are smaller wires on different battery cables, and other runs that are connected and some that are just cut off.

All I want is the HMMWV to run, I don't want to add any extra stuff to it (not at this time anyway).

do I need all the smaller wires connected around the battery bay?

There is one from the positive terminal (connected to the body under the rubber glob... it's just cut off - I assume I need to CAP it or some how remove it so it doesn't short out?

I am new to all this electronics stuff so I wanted to ask.

Thank you,
David
.
Chances are the wires were for radios and if they are colored wires, chances are even better that you don't need them. Factory won't have "extra" wiring hanging from the battery terminals...
 
Top