Spin on oil filter for 1989 M929

[Chad777]

Well, this is my first post, and I’ve done a lot of searching. Recently purchased the truck in the title. I would like to do a spin on oil filter conversion. The only Wix part number I can find (over and over again) is 24067. Wix specifies this is for a 69-75. Mine in an 89.

 

[M35A2-AZ]

You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96
I have been using them for many years now.

 

[Chad777]

You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96
I have been using them for many years now.

Thank you!!!!

 

[Chad777]

You are right that is not the right one, here is the right one Baldwin p/n OB1368 and the oil filter is wix 51970 or Baldwin B96
I have been using them for many years now.

I looked at Baldwin’s website and it says that one is for 1968 and older Cummins.

 

[M35A2-AZ]

I know that is the one. It needs to be the one that is about 2" thick.

 

[juanprado]

No one but the military kept using the old school nhc250 so the years don't align.

M35a2 gave you the correct part numbers. Many threads on it here in the 5 ton section.

The spin on come in many flavors of extended capacity, drain intervals etc...

 

[98G]

1989 should be an A2...

Post a picture of your engine please.

 

[Chad777]

1989 should be an A2...

Post a picture of your engine please.

It says the image of my motor is too big, but it lets me post this one. I see now it post blurry. It’s an A1

 

[M35A2-AZ]

I would say it is a 1985. I have a M923A1 that is a 1985.

 

[Chad777]

I would say it is a 1985. I have a M923A1 that is a 1985.

It came with a title that says 1989. You guys do know your way around these things. You prompted me to look at the tag on the motor which says 1985. Nice work!