coachgeo
Well-known member
- 5,080
- 3,403
- 113
- Location
- North of Cincy OH
in post linked below and a few post after; two of our "super users" you could say brought up adding some filters into CTIS for generic reasons. This sparked a thought on doing that for stopping concerns about using balance beads with CTIS... Didn't want to Hijack the thread that filter was brought up.... soooooo here we are. Questtion is.. can a filter be put in anywhere to alleviate the CTIS conflict concerns .. and if so where.
![20230408_141844.jpg 20230408_141844.jpg](https://www.steelsoldiers.com/data/attachments/676/676243-5a5d607191a816fc8676f50c3c546890.jpg)
M1078A1P2 CTIS Problem
The CTIS is constantly pumping air to the front passenger tire, then when it gets to where it needs to be it’ll start exhausting out of the quick release valve. Then goes back to pumping air to the tire and repeats. Thought it was the quick release valve so I changed it out with a new. Didn’t...
www.steelsoldiers.com
![20230408_141844.jpg 20230408_141844.jpg](https://www.steelsoldiers.com/data/attachments/676/676243-5a5d607191a816fc8676f50c3c546890.jpg)
Last edited: