• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Exhaust

USN_Green_Addict

Active member
Steel Soldiers Supporter
262
214
43
Location
Oahu, Hawaii
I'm finally in the market to make a custom exhaust with T304. Unfortunately I don't know what size would be best to help EGTs. I have read too large will hurt EGTs. My question is what would the optimal size be? I'm looking at doing away with the J pipe and going strait out and up.
 

NDT

Well-known member
Steel Soldiers Supporter
10,457
6,529
113
Location
Camp Wood/LC, TX
I went with the stock size which I believe is 3”, goes under the cab and up behind the cab like an 18 wheeler. Keeps the noise in the rear view. Works great with 185 hp LDS power.
 

LowTech

Active member
Steel Soldiers Supporter
971
152
43
Location
Arizona
I went with the stock size which I believe is 3”, goes under the cab and up behind the cab like an 18 wheeler. Keeps the noise in the rear view. Works great with 185 hp LDS power.
That's been my plan as well, only I was hoping to build a sleeper type box in the front of the bed and then have the stack behind that.

"Sent w/o me knowing"
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks