CTIS switching to different programs?

[Xengineguy]

I was wondering if switching voltage inputs has worked?? Like this image shows?

 

[DeMilitarized]

All I have read was theory. Im sure that is exactly how it works on the newer MTVR ctis controllers with mode settings for weights.

 

[Skyhawk13205]

CTIS pressure settings increase - no programming, transducer, or module required.

Well this is going to make a few people (including myself) feel really silly...... I've been getting pretty deep into a CTIS diag on a friends truck and had the occasion to swap modules between my truck and his, and vice-versa. And I've been going over documentation and troubleshooting info and...

www.steelsoldiers.com

GeneralDisorder did a post about the pin program settings on the CTIS controller. That is prob where you got that pic from. I have not read through it, but is makes sense, program the ranges into a controller from factory, set the pin program for each truck type, so you can swap controllers between trucks without having to reprogram.

 

[aw113sgte]

All I have read was theory. Im sure that is exactly how it works on the newer MTVR ctis controllers with mode settings for weights.

I was reading the mtvr manual and it stated the mode button didn't change anything on mk23 variants. I think it had a function on ones with a PTO however?
Maybe that changed later?

 

[DeMilitarized]

I was reading the mtvr manual and it stated the mode button didn't change anything on mk23 variants. I think it had a function on ones with a PTO however?
Maybe that changed later?

The weight settings on the controller are the only difference between m939 and mtvr controllers button wise


Sent from my iPhone using Tapatalk