Civilan transmission into M35 A2

[andyindy]

Looking for a cheaper way to get rear facing PTO for a lime spreader. Is there a tranny compatable with the original with out a lot fabrication? Would not necessarily need 5th over, but would be nice. Woulnd't be a lot of road travel, just between fields. I have 2 other trucks that will need rear facing PTO's also. Seems as though I've seen some civilian Trans with 2 PTO ports. As a side note the truck would be well maintained and not abused. It would live in machinery shed when not in use. I realize the purists may not like this abonmination, but will live on for a long time! TIA, Andy.

 

[NDT]

Do you need high horsepower? The transfer PTO might be an option.

 

[WillWagner]

Are you using the PTO on it now, like for a winch?

Flip the PTO?

Is it possible to flip a single-output PTO shaft going to the winch to face rearward for a PTO hydraulic pump? I am aware of the dual output PTO's but I can't find one for a reasonable price. A future tranny swap that I really want to do will probably force me to use a hydraulic winch up...

www.steelsoldiers.com

 

[andyindy]

Do you need high horsepower? The transfer PTO might be an option.

I don't think so, the bed has its own gear reduction and I believe the requirements are less than the 27 HP the transmission is capable of.

 

[andyindy]

Are you using the PTO on it now, like for a winch?

Flip the PTO?

Is it possible to flip a single-output PTO shaft going to the winch to face rearward for a PTO hydraulic pump? I am aware of the dual output PTO's but I can't find one for a reasonable price. A future tranny swap that I really want to do will probably force me to use a hydraulic winch up...

www.steelsoldiers.com

No PTO on it now.