Looking to replace the missing 60Hz Gauge on my MEP-803A...

[LWWz]

Unfortunately, someone absconded with the 60Hz gauge from my MEP-803A.

Does anyone know where I can find a replacement? I'm fine with aftermarket. I don't expect I'll need it to conform to "Military Standards" at my house.

I have scoured the internet and can't find anything...

Thanks in advance!

 

[Scoobyshep]

eBay is a good source. I usually end up with reed style gauges. Don't forget to bypass the transducer

 

[Light in the Dark]

Believe I have one, will check my stash

 

[Guyfang]

Say something if this deal get done.

 

[LWWz]

Believe I have one, will check my stash

I am looking forward to hearing if you have one! I would be eternally grateful!

Sorry it took me so long to reply! I got sent off to a job site for the last couple of weeks.

 

[Light in the Dark]

I looked today while skidding a 2 cylinder for a customer. Unfortunately I have already parted with the hertz gauge it seems, I only have the Percent Rated Current and Voltage gauges still, sorry.

 

[Light in the Dark]

Try here: https://www.ebay.com/itm/197061686061

 

[LWWz]

I looked today while skidding a 2 cylinder for a customer. Unfortunately I have already parted with the hertz gauge it seems, I only have the Percent Rated Current and Voltage gauges still, sorry.

My soul is crushed! Thanks for checking!

 

[LWWz]

Try here: https://www.ebay.com/itm/197061686061

I looked at the one on eBay. Is that a reasonable price? That's nearly 20% of what I paid for the whole generator and a full tank of reasonably fresh diesel... I don't want to burn $230 on a single gauge if it's out of line with what I should notmally expect.

 

[Light in the Dark]

Its not a commonly available gauge, and its specially made for this machine (and its frequency transducer). Like the price or not, its the right gauge for the spot.

Secondarily, you could always secure the wires to where this gauge should go, and just use a handheld meter off the front outlet. Id need to find the model number offhand, it escapes me at the present time.

 

[Light in the Dark]

One of these, can display hertz instantaneously. Just use a short extension cord off the outlet and you are in business.

https://www.amazon.com/P3-International-P4460-Electricity-Monitor/dp/B000RGF29Q/ref=pd_lpo_d_sccl_1/139-6844486-1957147?pd_rd_w=RSQLU&content-id=amzn1.sym.4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_p=4c8c52db-06f8-4e42-8e56-912796f2ea6c&pf_rd_r=9PGF0CP2P88J5YZ3NGHT&pd_rd_wg=icQye&pd_rd_r=7939f970-36b0-40fb-9283-03bd233c195f&pd_rd_i=B000RGF29Q&th=1

 

[Scoobyshep]

Theres aftermarket gauges that fit that hole available. Sometimes you need to bypass the transducer though