Looking For Heater Parts

[Tackettr]

I need a few parts to complete my coolant heater for my duece.


My List:

1. Part# 19 & 20, Mount for hose coming in from scoop.

2. Part# 1, Mount for hose going into blower unit.

3. Any and all electrical parts. Switch, mount, harness, junction, ect.

Thanks for any help or guidance.

 

[TedG]

I have those parts, pm if you wish. Thanks.

 

[98hd]

I need a few parts to complete my coolant heater for my duece.


My List:

1. Part# 19 & 20, Mount for hose coming in from scoop.

2. Part# 1, Mount for hose going into blower unit.

3. Any and all electrical parts. Switch, mount, harness, junction, ect.

Thanks for any help or guidance.

FYI: The heater kit I got came with 2 of the mounts that attach to the blower unit. The other is used on the side cover. My other deuce that came with a heater installed is setup the same way.

 

[Tackettr]

So if I understand correctly, then I need two of the "Part #1" from the illustration. I was wondering what the hose attached to. The illustration isn't very good. Thanks for the help.

 

[98hd]

So if I understand correctly, then I need two of the "Part #1" from the illustration. I was wondering what the hose attached to. The illustration isn't very good. Thanks for the help.

Not quite what I was saying. I think the parts you asked for are "correct", but in an alternate setup you can use 2 of part #1.

 

[spentshell]

One attaches to the heater blower and the other to the fender panel that opens, yes you need two.

 

[spentshell]

You have two options for the air intake that illustration shows the air intake in the lower position, the other option would be to install it on the side panel that opens.

 

[spentshell]

Here is what I did.

 

[TedG]

#20 is a 90 degee elbow but as stated, two of the #1's will work.

 

[Tackettr]

Roger, I'm clear now. The illustration makes sense now. TedG is going to help me out on it, so I think I'm in good hands!

Thanks for the help!!!