super single wheels and tires

[tm america]

yes they are to big they will hit in the middle the biggest you can run with stock susention is 15.5s or 395s they are 46.5 inches tall 14.00s are 48 inches tall which is to much

 

[M1075]

15.5s or 395s can rub the underside of the bed on a deuce if you carry enough weight and flex it out enough. I know, I have done it. For most applications you should not have a problem.

 

[rivired]

rims from od iron cost 300$ a piece marsh ones i think were like 260 last i heard..its unfortunate theres no companys that mass produce these wheels so we could avoid getting ripped off so bad.

 

[dm22630]

rims from od iron cost 300$ a piece marsh ones i think were like 260 last i heard..its unfortunate theres no companys that mass produce these wheels so we could avoid getting ripped off so bad.

Ripped off? Riiiiiiiiiiiiight........

Kids pay more than that for chrome rims for their 1995 Honda Civics.

ODIron rims DONT have a split ring, so you dont have to worry about getting your head cut off when you air up, they let you use bigger sized tires, and I have not heard a single complaint from anyone that has bought them. Have you?

 

[M1075]

rims from od iron cost 300$ a piece marsh ones i think were like 260 last i heard..its unfortunate theres no companys that mass produce these wheels so we could avoid getting ripped off so bad.

That is one of most idiotic comments I have seen on here in a long time.

 

[Seatyger]

260-300.00 per? I would pay that for those guys to build me a set of Wider Dually rims for my Suburban I'm messing with. For somethiing as big and heavy as a deuce, well, as soon I obtain the one I'm after, they will be the first place I'm going to call.

I realize that all things cost money..........and everyone is forced to prioritize but what other form of demented motor vehicular mayhem can you get involved in and still continue to feed the family on a regular basis? Sure isnt show cars, drag racing or any kind of competitive motor sports.

Even a bloody quad cost more than the initial investment into a deuce. Lets hope the sporting and hollywood elite dont clue into this past time (or at least not until I finish squirreling away all the parts and pieces I need)

 

[tjcouch]

260-300.00 per?

Per wheel.

 

[Seatyger]

My mistake, sorry about that. I realized the price was per rim, was 'questioning' the response concerning the cost.

You guys are pretty sharp LOL!

 

[nilareem]

Michelin 14r20

Where can I get two Michelin 14r20s? I'm in Oklahoma. Also, did I understand right that OD Iron makes a wheel without the deadly rings?

JEFF

 

[BMCUSNAVY]

tjcouch..... I checked on the odiron website & didn's see anything about the rims you have on your deuce..... can you give me some guidance? I have a 2x4... lol lol lol. What was the cost & what tires are you running? Thanks,

Wayne

 

[venom8343]

hey thanks flight! Yeah that is a little high for just a basic wheel. I think i found a company that makes them in flordia for $210 per wheel. I'll let yall know what i come up with. And thanks for pointing out what tires fit on these dang trucks. Much appreciated!!

 

[tjcouch]

tjcouch..... I checked on the odiron website & didn's see anything about the rims you have on your deuce..... can you give me some guidance? I have a 2x4... lol lol lol. What was the cost & what tires are you running? Thanks,

Wayne

Sales@odiron.com is probably the best way to find out the info you need - you are correct, they are not on his site . . . yet.

 

[tjcouch]

did I understand right that OD Iron makes a wheel without the deadly rings?

JEFF

Correct.

 

[rockman]

Lest we all forget about USA6X6.....OD is asking a fair price.

 

[BMCUSNAVY]

Thanks TJ appreciate the reply & info.... =)

Wayne

 

[calvin3103]

does any one know if can you run 395x85x20s on a m62 wrecker with hemitt rims

 

[sandman7655]

Who has the best price on super single wheels for the duece.I wanna change out my stock wheels.

 

[silverstate55]

does any one know if can you run 395x85x20s on a m62 wrecker with hemitt rims

Calvin, that wrecker looks good! I believe you should be able to fit the HEMMT wheels on your 5-ton hubs, those tires will easily fit in your truck's wheelwells...IIRC, you can run up to 16.00x20 tires on your wrecker.

Any luck finding wheels/tires?

 

[harleyboy1]

New Wheels

hey thanks flight! Yeah that is a little high for just a basic wheel. I think i found a company that makes them in flordia for $210 per wheel. I'll let yall know what i come up with. And thanks for pointing out what tires fit on these dang trucks. Much appreciated!!

Please let me know how the wheels come out......Thanks.....

 

[Ford Mechanic]

I have the 395's on my A2 and they rub the steering, anyway to space them out without buying new rims?