• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

need help figuring out how to re-route air supply lines

Floridianson

Well-known member
Steel Soldiers Supporter
7,406
2,497
113
Location
Interlachen Fl.
Check valve is on the end of the tanks facing towards tandems. Keeps outboard tank from bleeding back to inboard if air leak is on any outboard circut. Brakes are on inboard so they protect them till all else has failed.
 
Last edited:

m109guy

New member
383
27
0
Location
ON
Any photos of how and where you mounted the waste tanks?
Sorry I didn't take any pictures of the tanks mounted. I installed them under the truck between the frame rails. I made a rack for them to sit in, then bolted them between the frame rails and did the plumbing.

I would take pictures, but it has been raining here like an SOB for the past few days, and I don't feel like laying in the water/mud. I will try to take some next time it is nice out.

m109guy where did you get your waste tanks and what arfe the deminsions of them
Got them off of ebay. From this seller: NEW RV Parts and Truck Accessories eBay Store About My Store

He has many different sizes available for sale.

Sorry I made a mistake, I thought they were 42 gallons, but they are 39 gallons. Close enough ;)

They are 48.5"L x 25"W x 9.5"H

Yea, I've gone through his build page about 150 times...he's done a fantastic job on his 109, but there were no details or photos of the mounted waste tanks (can't expect to show everything or it would be a novel).
Yeah I would have liked to have posted everything in detail, but I only have so much time to write about it, take pictures and post it. Like you said, if I posted everything, it would be very, very long.
 

Bad_Carp

Active member
Steel Soldiers Supporter
695
53
28
Location
Palm Springs, Ca
Sorry I didn't take any pictures of the tanks mounted. I installed them under the truck between the frame rails. I made a rack for them to sit in, then bolted them between the frame rails and did the plumbing.

I would take pictures, but it has been raining here like an SOB for the past few days, and I don't feel like laying in the water/mud. I will try to take some next time it is nice out.
Weather improve yet in the Great White North? Would love to see a pic of how the waste tank(s) is mounted and lines ran.

Just ordered my holding tanks and pump to get started on the system.
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks