• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

m35a2c clogged fuel system

dpsmith

dpsmith

Member
Steel Soldiers Supporter
121
0
16
Location
Birmingham/Alabama
Yes....Look at the picture in post 10. This control rod should move VERY freely with little or no resistance. I cleaned mine without removing the head so it saved alot of work. I guess the instructions Warthog gave me were in a PM. I'll go back and see if they are still there.
 
velociT

velociT

New member
853
4
0
Location
Burnet co. Texas
dpsmith said:
Yes....Look at the picture in post 10. This control rod should move VERY freely with little or no resistance. I cleaned mine without removing the head so it saved alot of work. I guess the instructions Warthog gave me were in a PM. I'll go back and see if they are still there.
Click to expand...
If they're still there please PM me too DP.

Thanks in advance.
 
dpsmith

dpsmith

Member
Steel Soldiers Supporter
121
0
16
Location
Birmingham/Alabama
Sorry guys the PM got the axe, I should have saved it. But all of the same info can be found in the TM's. Just make sure you take your time because there are some small parts and the angles on the control rod need to be maintained. Btw you will have to stand on your head while doing it. :-D
 
stampy

stampy

Active member
1,321
22
38
Location
Henderson. NC
I have found that biodiesel or even WVO (thats centrifuged) cleans the fuel system real well. When I ran my m1009 on it, I ended up changing the filter twice from all of the crud in the tank. So far only once on the Deuce filters though! You might want to blend a little diesel with it just so it flows better when it's cold, but so far no problems here in Northern NC.:-D
 
Keith_J

Keith_J

Well-known member
3,657
1,323
113
Location
Schertz TX
stampy said:
I have found that biodiesel or even WVO (thats centrifuged) cleans the fuel system real well. When I ran my m1009 on it, I ended up changing the filter twice from all of the crud in the tank. So far only once on the Deuce filters though! You might want to blend a little diesel with it just so it flows better when it's cold, but so far no problems here in Northern NC.:-D
Click to expand...

Won't help here. The control collar adjusting mechanism is the ONLY seal between diesel at 60 PSI and engine oil. It is a precise fit, once it is dirty to the point of sticking the governor, fuel will not get in between. The material that causes the sticking is oxidized diesel varnish.

Carefully taking the unit apart (pay attention to alignment of the lever and shaft) will allow cleaning with solvent. When reassembled and installed, check for fuel leaks by turning the master switch on. It should remain dry on the outside, this is important as any leak here will end up in the crankcase!
 
You must log in or register to reply here.
110,922members
165,349threads
2,326,614posts
1,386online users
Top
✖
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks