GL Wins today 10/29 - what did you buy?

[surfdog]

Got two M35A3's from Fort Drum NY. Cat motor, auto trans, dual brake system, electric wipers, hardtop, heater...

Can't wait for these EUC's to come through!!!!

Now just got to tell the wife... or maybe she won't notice two more trucks among all the others.

 

[FMJ]

Nothing for me, but to whom ever bought the 700.00 Tan M105 trailer with the CBC shelter at Ft Bliss, it has a bent/pinched frame and no landing gear. . .

 

[mkcoen]

Nothing for me, but to whom ever bought the 700.00 Tan M105 trailer with the CBC shelter at Ft Bliss, it has a bent/pinched frame and no landing gear. . .

I was bidding on that but all I wanted was the shelter. I had already planned on a different 105 but for what that brought I couldn't afford the extra trailer and expense of getting out to Bliss to pick it up.

 

[drgreg]

I got a M105A2 with the engineering set-up, or whatever they are.

 

[ida34]

I was looking hard at the carpenter M105 trailers at Rock Island but too far to go get.

 

[maddawg308]

The dually M1028 with the new maintenance body in Richmond sold for $6800 plus the 10% and tax. It was REAL nice, and someone wanted it BAD.

 

[velociT]

Bid on nothing, won nothing

 

[doghead]

Surfdog, you beat me on those A3's! Oh well...

I did win a lousy M105, I need it for more storage space.

 

[surfdog]

Surfdog, you beat me on those A3's! Oh well...

I did win a lousy M105, I need it for more storage space.

Who got the other three A3's? One was W/W.

I thought prices were OK compared to what they've sold for before @ Fort Drum, and the prices were better than @ Ft Campbell TN today.

 

[mkcoen]

Who got the other three A3's? One was W/W.

I thought prices were OK compared to what they've sold for before @ Fort Drum, and the prices were better than @ Ft Campbell TN today.

And the ballpark prices were?

 

[doghead]

low 4 to 7K(winch truck).

Prices were the lowest I've seen on them.

 

[mkcoen]

low 4 to 7K(winch truck).

Prices were the lowest I've seen on them.

Last auction there was one in Pineville, LA that went for $3900 and 6-8 that went for under $6k, and 2 for over $6k. One guy bought all the ones under 6. If I see one for under $4k again it's going to be in my driveway.

 

[marchplumber]

I too acquired a "carpenter" M105a2 from Rock Island. Curious as to how the "tail gate" works. Hey Dr Greg, you comin down to get yours? May be we could get together, I only live about one and a half hours from there. PM if interested. First purchase on GL. Hope I did the EUC thingie right! LOL I'm sure they will let me know if I didn't! Looked at the one with the "new" spares in the back,,,,,,, it went to high for me (and the wife! LOL)
God bless,
Tony

 

[Recovry4x4]

Gate operates by a hydraulic jack looking pump on the right side of the trailer. 100% manual operation.

 

[TaylorTradingCo]

I picked up two Checker Cab Co. M105's out of Rock Island, IL. One had a spare tire in it and the other was full of side rails. I need help from someone up there to get these off base and stored until I can figure out how to get them home to GA. Any help would be appreciated.

Derek Taylor

 

[glenn]

And only 170 miles from home....

 

[emmado22]

Taylor,

when you get those trailers, let me know what bumper #'s are on them please.

 

[6x6junkie]

hey surfdog what lots did you get

 

[ElkHunter61523]

Tried to get one of the covers and bows from Sparta...more than I wanted to give.

 

[ElkHunter61523]

I'd run with you Tony if you need another body and vehicle to pull. Just holler at me.