DEUCE PTO Output Shaft

[booger]

Does anybody have a Deuce Tranny PTO output shaft (all I would need is the shaft) that drives towards the rear? I want to put my winch on the back of my Bobber. Even a dual output shaft would work. Or a transfercase PTO would work if anybody has one they'd part with. I need one or the other.

Thanks for your help

 

[twright]

I have a Transfer case Pto PM me

 

[tm america]

that was easy wasnt it

 

[booger]

that was easy wasnt it

That was.

I've also found out a 5 ton shaft in a 2 and a half ton box works too. Can anybody verify that?

 

[gringeltaube]

......

I've also found out a 5 ton shaft in a 2 and a half ton box works too. Can anybody verify that?

YES. It's been covered in detail here: http://www.steelsoldiers.com/deuce-modification-hot-rodding/45428-flip-pto.html

G.

 

[booger]

that was easy wasnt it

Not really, I have had several responses. Most are confusing the 'PTO output shaft' for the 'drive shaft'

Still looking. Can anybody help?

 

[Scarecrow1]

This is a shot in the dark but a few years ago a friend of mine found one at a farm supply. He then had a machine shop make the nessisary changes to fit ....I know it was not the cheapest way but it at the time it was the only way .........

 

[jatonka]

You can buy an accessory drive that bolts to the deuce PTO, it runs independantly and faces to the rear. PM me if you want one. JT out

 

[booger]

Thanks Jatonka, PM sent