ARDUECE
New member
- 105
- 1
- 0
- Location
- New Site ,AL
does anyone know the exact weight of a 2.5 ton center section?
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
chunk/center section weight
- Thread starter ARDUECE
- Start date
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
Good question ?My guess is 150-200lbs.i if remember my scale i will weigh mine next week when i have it out
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Your guess is wrong George! I have one sitting in the back yard and I can barley move the dang thing! I will see if I can get it on a scale for you.
- 34,012
- 1,808
- 113
- Location
- GA Mountains
DON"T drop it. These suckers are very heavy.
tm america
Active member
- 2,600
- 24
- 38
- Location
- merrillville in
i'm curious to see.i need to change my front sometime soon.i'm not looking forward to pulling the whole axle out to do it
maybe i'm trying to convince myself it is real light .So if i think it will be easy maybe i will be able to talk myself into jumping on it.....
maybe i'm trying to convince myself it is real light .So if i think it will be easy maybe i will be able to talk myself into jumping on it.....
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
One day Im going to put a locker in the rear of mine.I was told I have to take the bed off.And use an engine hoist.More work.
ARDUECE
New member
- 105
- 1
- 0
- Location
- New Site ,AL
ive had them out before but for repairs. this is for shipping. if you could weigh it gr i would appreciate it.
ARDUECE
New member
- 105
- 1
- 0
- Location
- New Site ,AL
locker
when you get ready too put one in i can get one for$389 delivered to your door. yukon grizzly so it is a brand name. ive put mine to the test and no problems yet.
when you get ready too put one in i can get one for$389 delivered to your door. yukon grizzly so it is a brand name. ive put mine to the test and no problems yet.
RANDYDIRT
New member
- 403
- 4
- 0
- Location
- Furlow Ar.
ARDEUCE I would like more info on the locker.
Dirt
Dirt
LanceRobson
Well-known member
- 1,638
- 206
- 63
- Location
- Pinnacle, Stokes County, NC
ARDUECE
New member
- 105
- 1
- 0
- Location
- New Site ,AL
rons machine service 810 644 2664
Billy Bobbed
Active member
- 1,346
- 13
- 38
- Location
- Terre Haute,Indiana
I seen them on Ebay,I didnt know if they would hold up.That was the one I was going to get.
ARDUECE
New member
- 105
- 1
- 0
- Location
- New Site ,AL
mine has in my bobbed. i put it to the test pulling another duece out. one of those things where you just had to be there.
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
I went outside to see if I could lift it onto the scale, no dice. I will get out the cherry picker tomorrow and get an exact weight.
Unforgiven
New member
- 675
- 18
- 0
- Location
- Las Vegas, NV
gimpyrobb
dumpsterlandingfromorbit!
- 27,786
- 755
- 113
- Location
- Cincy Ohio
Yup, thats it! I built a 2x6 box for mine to sit in.
Rockford514
New member
- 1
- 0
- 0
- Location
- Fernandina Beach,Fla.
I weighed this one 241lbs
Last edited: