Hemitt wheels?

[zoto6ixty]

I bought 6 of these wheels with 16.00x20 tires to install on my M816 but the lug pattern seen to be too large on these wheels Does anyone know what these came off of , and what I could do with them now? Thanks

 

[doghead]

Please add your State to your location information. This is a site requirement.

Thank you

 

[Maverick1701]

IIRC I dont know about 816s but I know w/deuces you have to get new centers for the rims before they will fit.

 

[Ruppster]

What ever they're made for uses hub piloted rims, not stud piloted like the older 5 tons. So even if the pattern was correct the holes for the lug nuts is not beveled. Those rims are meant for use with a flanged type lug nut. Anyone know what kind of rims the Stryker uses?


Ruppster

 

[KsM715]

IIRC I dont know about 816s but I know w/deuces you have to get new centers for the rims before they will fit.

The M816 has the same 10 lug pattern as the hundreds of HEMMT wheels that have come out of GL in the past 2 years.

Those wheels the OP has might have come off of a MK17 or similar varient.

 

[Ruppster]

Those wheels the OP has might have come off of a MK17 or similar varient.

I was thinking the same thing at first (about the MK17) but if I remember correctly the MK17 has an odd sized rim, something like 21 inches.


Ruppster

 

[Bighurt]

I was thinking the same thing at first (about the MK17) but if I remember correctly the MK17 has an odd sized rim, something like 21 inches.


Ruppster

I second that there is an old discussion discussing mk17 rims... don't have the link atm

 

[gimpyrobb]

Not hemtt rims.

 

[M1075]

Those are PLS rims from M1074 or M1075 trucks. Not compatible with 5 tons.

 

[drgreg]

I think they are from a PLS.

 

[zoto6ixty]

Thanks everyone, I will be in the market for a different set of wheels to use with the tires.

Anyone need a good deal on some wheels?

 

[drgreg]

Just buy a PLS, they are really cool.

 

[cjtroutt]

Those are PLS rims from M1074 or M1075 trucks. Not compatible with 5 tons.

Dont for get M1070 HET uses the same parts as the PLS. for the drive Traine.

 

[KsM715]

There you go, got the tires and wheels now just go get you a M1070.

 

[oldMan99]

Is the PLS or 1070 enough truck to pull my 18' bass boat or do I need something larger with more traction to get it up the boat ramp?

 

[drgreg]

PLS should work, or you could go this route.

 

[XanRa]

PLS should work, or you could go this route.

thats not a regular pls- atleast not the kind that uses the wheels we're refering to- the one you posted was a hemtt with a pls system not a m1074 or m1075 which uses these wheels(also has 5 axles)

sorry had tobe the smart @ss
im good at that at times....

 

[cjtroutt]

Ditto XanRa ditto
The moto is the only way you know it you hade to be there and done it first hand.

 

[M1075]

thats not a regular pls- atleast not the kind that uses the wheels we're refering to- the one you posted was a hemtt with a pls system not a m1074 or m1075 which uses these wheels(also has 5 axles)

sorry had tobe the smart @ss
im good at that at times....

Actually, the PLS is the M1074 and M1075, with or without the M1076. The M1120 HEMTT has the LHS (Load Handling System). Very similar in design, but only 11 ton payload, compared with 16.5 ton on the PLS.

 

[cjtroutt]

Ditto M1075
I cross trained on the Pls in Iraq one thing I did not for get is the term CHEW.