- 205
- 7
- 28
- Location
- Brenham, TX
I can't seem to find the part numbers for the oil and fuel filters on a newly acquired M52A1 (Mack engine). Can anyone help me out on part numbers and where to get them?
Jim
Jim
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M52A1 (Mack) oil and fuel filters
- Thread starter jamboly
- Start date
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
Congratulations on the Mack!!
All these are Baldwin numbers
primary oil P20HD
bypass oil P52
primary fuel PF 828( i think)
secondary fuel PF 819 or PF 819HD
All these are Baldwin numbers
primary oil P20HD
bypass oil P52
primary fuel PF 828( i think)
secondary fuel PF 819 or PF 819HD
Old Lincoln County Iron
Member
- 490
- 5
- 18
- Location
- Carrizozo, NM
Is your M52A1 the one that green goat had?
vtdeucedriver
Well-known member
- 2,523
- 38
- 48
- Location
- Vermont
Did not take long for AM GENERAL to move in.............No brandon, I am sure its not forsale!!
- 205
- 7
- 28
- Location
- Brenham, TX
Yes. I got it from Green Goat.
- 205
- 7
- 28
- Location
- Brenham, TX
Can someone verify the primary fuel filter number?
AMGeneral
Well-known member
- 2,301
- 115
- 63
- Location
- Connelly Springs, NC
It depends entierly on which filter housing you have,I have seen mack powered trucks with 2 different types of primary filters installed.
- 205
- 7
- 28
- Location
- Brenham, TX
I forgot to ask for the air filter number, plus any others I might not be aware of.
Are the oil filters the same as the M35A2 mulitfuel?
Are the oil filters the same as the M35A2 mulitfuel?