iamspencer
New member
- 54
- 0
- 0
- Location
- Roxbury, CT
-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
CUCV Bucket Seat
- Thread starter iamspencer
- Start date
Iceman3005
Active member
- 933
- 97
- 28
- Location
- Holt, MI
Well here we go!...........I can hear it coming!.................wait for it..................
lindyp38
New member
- 788
- 0
- 0
- Location
- ulster county ny
sounds like a fair price...
Since it is his own, it is allowed if he changes his post slightly
.....something like... "I have been working on my XZY and after everything is back together I have some extra CUCV parts, here is the link"
From the Forum rules as of today....
"Do NOT post links to current eBay auctions or Craig's List ads that are not your own. You may post a link to your own auction/ad only if it is in an information/discussion thread about you vehicle/item. Do not start a post in the Conversations forum or your vehicle specific forum just to announce your auction/ad
Iceman3005
Active member
- 933
- 97
- 28
- Location
- Holt, MI
Sorry I didn't see that it was his, Plus I am very easily amused and was hoping for an interesting comment so I could have a good laugh.I am assuming it is his own, as I went to the listing and they are both from Roxbury CT.
I guess all the other posting police are napping right now....
MakersTeleMark
Member
- 408
- 0
- 16
- Location
- Colo.
To make it an informative thread, how hard is it to swap out the bench in a 08/28 for buckets?
Iceman3005
Active member
- 933
- 97
- 28
- Location
- Holt, MI
Here are some pics of a blazer floor can see the four mounting points, floor is a lot different than a 1008/28. You would have too drill holes in your floor for seats to mount but how high up would they be? Would probably have to modify seat mounting brackets.Attachments
wdbtchr
New member
- 883
- 3
- 0
- Location
- St. Louis, MO
I wouldn't think going from a bench seat to buckets would be a problem. Going the other way however? I took the bench seat out of my '50 Chevy pickemup and put in buckets, but then it has a flat floor.
Iceman3005
Active member
- 933
- 97
- 28
- Location
- Holt, MI
cucv, chevy, 10008/28 all the same have a hump under bench seat
Iceman3005
Active member
- 933
- 97
- 28
- Location
- Holt, MI
as seen in upper right corner of pic
Attachments
- 34,012
- 1,810
- 113
- Location
- GA Mountains
Burbs also have the bump, seek a burb for bucket seat swap.
Boreal21
New member
- 106
- 0
- 0
- Location
- Central Utah
Doesn't say if it's driver or passenger?
- 133
- 0
- 16
- Location
- Edinburg, MS
Floor on the M1008/28/31 is different than the M1009.
Attachments
Chief_919
Well-known member
- 2,050
- 103
- 63
- Location
- Western NC
If you want bucket seats in a 1008/1029 you need to get the seats and also the brackets that are welded to the floor from an M1010.
- 7,584
- 363
- 83
- Location
- Cheyenne, WY
The M1010 seats/brackets are semi-close to bolt in. You will have to drill one hole in the floor for each seat and one of the 4 mounting points for each seat will have to be made/modified.
bshupe
New member
- 440
- 4
- 0
- Location
- Mount Vernon, WA
Bump - My 1031 has buckets and I would like to add a third to the middle position. Anyone tried this before? The belts are already there but Im considering adding a roll bar and putting a shoulder point from the bar, perhaps a low bar just below the window and go with a 4-point restraint for each seat.
Thoughts?
Thoughts?