Tomorrow I will be flushing the system. All but one line are new (they did not have enough material and the line was ok). I have 2 litres of new DOT 5 (at $40 a liter)
- I will pump out the reservoir and remaining line BEFORE reinstalling the new lines. Also try to empty all cylinders by opening the bleeding nipples. Since the linses are not coonected, the cylinders should empty themselves on gravity?
- Then fill the reservoir with DOT 5, close all nipples and then start pumping out the cilinders, starting with the rear rear left niple open, close left then open right, , close rear right and open mid right etc etc .... and working forward, keep adding DOT 5 fluid.
I would think that would do the trick to get the system clean and fresh. Did I forget something?