- 2,118
- 67
- 48
- Location
- Maine USA
Finished the kit install today. Before I hooked the line to the atomizer I verified it was shooting ether by placing the hose on the side morror arm and from the cab activated the toggle and when I released it she fired! You can hear a click when it activates. I placed the ground wire on the bottom mounting bolt and inside the cab under the nut placed a star washer to ensure a good ground. I decided to bypass the thermostat that came with the kit. I was a little unsure of the atomizer arrow location as the instuctions say toward turbocharger, I take it this means straight back at the firewall where I removed the other flame heater injection parts. I would like feedback on this to make sure I located it correctly. Here are a couple of pics of the finsihed product.
Attachments
-
36.6 KB Views: 275
-
40.2 KB Views: 274
-
30.1 KB Views: 277