niferous
Member
- 715
- 6
- 18
- Location
- Houston, TX
OK I took it by the body shop and they said they don't think the frame is bent. Also they didn't charge me anything.
So I went by the place where I took it to check out the allignment and such and he said he didn't check the rear end at all.![Mad :x :x](https://www.steelsoldiers.com/images/smilies/icon_mad.gif)
SOOOOO I'm going to try and check the rear leaf spring center pins. I was able to get the u-bolts off without too much trouble. I know I need to remove the shocks and I'm going to try and pick up some taller jack stands at Sears tomorrow. Do I really need to remove the brake lines or will the stretch far enough for me to drop the axle without messing them up?
Also once I get the truck's frame supported high enough do I just let the axle lower down on the jack?
So I went by the place where I took it to check out the allignment and such and he said he didn't check the rear end at all.
![Mad :x :x](https://www.steelsoldiers.com/images/smilies/icon_mad.gif)
SOOOOO I'm going to try and check the rear leaf spring center pins. I was able to get the u-bolts off without too much trouble. I know I need to remove the shocks and I'm going to try and pick up some taller jack stands at Sears tomorrow. Do I really need to remove the brake lines or will the stretch far enough for me to drop the axle without messing them up?
Also once I get the truck's frame supported high enough do I just let the axle lower down on the jack?
Last edited: