• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Dana 70 closed knuckle front

ODdave

New member
3,213
38
0
Location
lansing michigan
Shouldn't they be 23 spline? 35 where mainly in the open knuckles whern't they?.

Had some. called the guy that bought them to see if he still had them. waiting on a call back.
 

steve6x6x6

Well-known member
Steel Soldiers Supporter
1,425
36
48
Location
Winter Haven, florida
Shouldn't they be 23 spline? 35 where mainly in the open knuckles whern't they?.

Had some. called the guy that bought them to see if he still had them. waiting on a call back.
There was IH, 1300 and 1600 seires that had 35 spline stub axles with 8 bolt locking hubs. I have owen them all, over one thousand dana 60 and dana 70 fronts have been through my shop.
 
Last edited:

Rwhite1

New member
2
0
1
Location
Queensland, Australia
Hey Guys, Hoping one of you dana gurus can help me out here. I'm chasing some free wheeling hubs for a 4wd Converted Toyota Coaster Bus with what I believe is a Dana 70 its closed knuckle 6 lug hub with 35 spline axles.
Thanks
 

Attachments

Nailhead

New member
21
1
3
Location
Longmont, CO
The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.
 

Rwhite1

New member
2
0
1
Location
Queensland, Australia
The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.
The hub bolt pattern & circle looks like that on my IH 1310, but your stub axle has more splines than I remember having on mine, which looks to ruin any chance of using IH locking hubs.

That’s 5-lug, BTW.
Should of said 6 bolt hub. The 5 lug wheel studs is a custom adaptor, it's a standard 8 lug pattern behind the adaptor plate
 
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks