2011 GA Rally Buy/Sell/Trade Thread

[poppop]

I have several large outdoor speakers for a PA system if anyone is interested, unknown condition. Wrecker has first dibs if he wants them.

 

[73m819]

I have a NIB block heater for a 250 i'll bring if anybody is interested, just find me at the rally

 

[1958 M274]

I'll be bringing a nice aluminum boarding ladder to sell (SOLD to Sirblissful!), a good take off M35 steering wheel ($60), and some of my M16A1 replicas built with real stocks, handguards, and pistol grips on demilled barrels and solid aluminum receivers ($225 each).

I also have a 14.00-20 Michelin XL radial on a 5 ton combat wheel. I'm guessing it's around 75% tread. There is about 3/8" broken off of the end of the valve stem where the threads for the valve core and cap end. I think it could be rethreaded if you have a tap and die that are the right size. $150, and I'm only bringing it if someone says they'll take it ahead of time.

Thanks,
Joe

 

[wreckerman893]

I want to change out my bench seat in the M-1028 to buckets, any suggestions..?

Civy buckets out of a Suburban???

 

[Sirblissfull]

I'll be bringing a nice aluminum boarding ladder to sell ($75),

I will buy that ladder.

 

[wreckerman893]

I also have an aluminum boarding ladder since the other one is spoken for......I'll let it go for the same money.

Subject to approval by purchaser.

 

[3dAngus]

I'm wanting an aluminum boarding ladder. PM sent.

 

[wreckerman893]

Sold to the man with the cow avatar!!!!!!

 

[wreckerman893]

Does anyone have the air valve assemblies for the HEMMT wheels....if I score some tires I'll need them.

If someone knows an alternative work around that would be OK too.

 

[Tinwoodsman]

Hey WM. Is that the ladder you were going to send me pictures of?

 

[wreckerman893]

Hey WM. Is that the ladder you were going to send me pictures of?

I don't think so...this one was buried under a load of crap in the van trailer. I used it last year at the GA Rally but I have a ladder (boarding steps) that hook into the side of the van now. While I was repacking the van it surfaced along with some stuff I bought last year and never unloaded.

The one we talked about is under the shed....I think it is steel but I'll double check.

I am somewhat forgetful but I'll get out there today and shoot some pics of it.

Sorry Tin.

 

[Tinwoodsman]

No problem WM. I know you have a lot on your plate plus being so busy fending off all the good looking women.

 

[LanceRobson]

I want to change out my bench seat in the M-1028 to buckets, any suggestions..?

I have the adjustable bucket from the driver side of an M1010 ambulance. I thought I had the passenger one too but haven't spotted it up on a shelf or pallet rack. I won't be coming but I think doghead would bring it.

Pm me if you are interested.

Lance

 

[3dAngus]

I think you quoted Tin steel. I passed on that one due to the fact that my wife needs to move it in and out.

I needed the aluminum one. Hope that helps.

 

[wreckerman893]

They are both aluminum.....if Tinman passes on it I'll haul it to the rally and pimp it off.

 

[Tinwoodsman]

WM, will this fit a deuce with HEMTT's and 395's or will it be too short. I want it but want it to fit.

 

[wreckerman893]

I'll send you measurements tomorrow....my guess it that is it may be.....I think it was used to access shelters up in the back of deuces or 5 ton cargos.

It has tabs on it that look like they were made to go in slots cut into the tailgate.

 

[tigger]

I will be having some unassembled snow men that can be picked up in my driveway after the first snow fall. and best of all they are FREE some Assembly required!

 

[panzerwillie]

Does any one have a rear bumper for a HMMWV i think they are airlift bumper, its mainly flat across let me know thanks

 

[CARNAC]

Hey CARNAC,
I want a full set of 101 fiberglass sideboards. Would you happen to have a green or 383 camo vinyl cover for a 101?
Thanks,
Joe

OK, get with me early on the racks.

Not sure about the cover but I'll see if I can find one.