AirPak - newer short style, where should I add lubricant?

[martinwcox]

I need to add some OHT to the Airpak but the new shorter style has no plug to facilitae this.

Should I disconnect the airline at the Airpak and add there or where?

 

[OldDominionIron]

Okay, I'll bite...what's OHT?

 

[Heavysteven]

Air Tool Oil, I lubricate where the air enter the airpack, but yes you can pull off the J and lubricate there.

 

[martinwcox]

It's what's specified in the LO for the AirPak....picture attached of NOS can I have............

 

[martinwcox]

No J tube on mine as is the new shorter style.

Air Tool Oil, I lubricate where the air enter the airpack, but yes you can pull off the J and lubricate there.

 

[Heavysteven]

http://www.steelsoldiers.com/deuce/40509-long-vs-short-airpack-pics.html

There should be a line feeding the rear of the pack

 

[clinto]

http://www.steelsoldiers.com/deuce/57986-air-hydraulic-cylinder-question.html#post673718

 

[martinwcox]

Ah, when I took a look under the truck I was looking at the mounting bolt and the central boss, did not really see the, I guess 'L tube', many thanks.

http://www.steelsoldiers.com/deuce/40509-long-vs-short-airpack-pics.html

There should be a line feeding the rear of the pack

 

[rlwm211]

Remove the inlet air line. Squirt some oil in the line and then reconnect and cycle the brakes several times. This will work the oil through all of the air circuit.

RL