Recent content by Bkoyle

My deuce that started this thread only has 687 miles on the odometer. I would like to make sure that it lives to 60k miles.

Thank you, thank you for all the help!! I think that I will check for water in the fuel, oil, etc, and drain the fuel tank. Likely I will work on it in the next few days. To answer some specific questions, I have to move it about 40 miles to my new place. The biggest problem with the...

I bought a M35A2 7 years ago, and loved it for the first two years I had it. As life would happen, 5 years ago I moved, and was not able to take my deuce with me. I last started my truck about 4 years ago, and has been sitting since. It has been sitting at a friend's house in the Mojave...

FSBruva states: should read: Even though the TIRE can be used without a TUBE, the WHEEL requires the flap and tube. Bruce

RDD said: There is one on Ebay right now at a starting price of $10 with $30 shipping. Item #8010351938 Usual disclaimers apply Bruce

I am in the process of replacing the engine rear main seal. I took the seal holder off, which is alumnium, drove out the old seal and pressed a new seal in. Then I went to remove the old gasket between the block and main seal holder. The gasket would come off. Some small chunks came off, but...

Where is the best place to purchase the original type wiper motors? I need 2. Seems like everyplace is either out of them, or wants too much money.

How is the ride on the bobbed deuce? Is it harsher? Is it more or less difficult to steer? Thanks

There is a good write up with pictures here: http://rawfire.torche.com/~opcom/11x20/11x20fit.html Looks like it will work. Bruce

Does any one have a Napa number or otherwise for the clutch alignment tool? Am working on a clutch rebuild and that is the only thing that I am missing. I know some people have made them, but don't have access to a lathe. Thanks very much. Bruce

I have a new to me M35A2. The clutch was out from the day I purchased it. It idles great, but have no idea how it drives. Anyway, I looked at the bottom of the engine/ trans adapter plate, and there seems to be fresh oil there. I almost have the trans out and was wondering if I have to...