Recent content by bones1

  1. bones1

    MEP 003a Question

    Is this the neutral bonding jumper thats disconnected from ground?. It is smaller than the wire on the back of the L0 lug .If so I leave it off for a 4 wire setup and use no ground rod at the generator
  2. bones1

    MEP 003a Question

  3. bones1

    MEP 003a Question

  4. bones1

    MEP 003a Question

  5. bones1

    MEP 003a Question

    Can you supply a picture of where this is please?. Thanks
  6. bones1

    MEP 003a Question

    Hi. Do you have a pucture of where they are. I need to be sure i have the correct neutral wire to un bond.
  7. bones1

    MEP 003a Question

    Help. Can you tell me exactly where this lug is nonded please. I think i found the correct wire but not sure.
  8. bones1

    MEP-003A hook up question

    Most excellent reply sir. You have convinced me to forget automating the process and better yet stick with the mep-003A I have. It is trailer-mounted and has the ASK kit on it so it's not terribly noisy. Now all I have to do is plug it in and test the 5 yr old setup.
  9. bones1

    MEP-003A hook up question

    Looks like most of the heavy stuff is on the generator side. Been a while since I looked.
  10. bones1

    MEP-003A hook up question

    Interesting Scooby. That would be tough working with my panel I would suspect.
  11. bones1

    MEP-003A hook up question

    Thank You for the information. I was just thinking of family members switching it over, i can do it easily. Also if I was to purchase a Generac small standby propane generator say a 17 kw to power this panel would that be overkill for this panel and would a 17k run ok on my 330 gal propane...
  12. bones1

    MEP-003A hook up question

    The electrician installed the panel, I got it inspected and it has never been tested with a generator. I am looking to do that now. It's been 5 years and I want to check the wiring from house to generator but I believe it is correct at the generator with the neutral to ground connection...
  13. bones1

    MEP-003A hook up question

  14. bones1

    MEP-003A hook up question

    Correct. Appliances are gas and ac/ heat units are mini splits in parts of the house. I only am concerned with running the well and mini splits and tv computer, fridges and small stuff. Only 2 people live here so we're good with 125 A. And thanks for looking. I got it with the Mep003 's output...
  15. bones1

    MEP-003A hook up question

    I set mine up about 5 years ago and I think I followed this or a similar thread somewhere. I just went out and looked at the generator and I have the neutral wire loose and taped off and it's in the shop so no ground rod attached. Never did. have that. I have a 4 wire #6 100 ft so cable going...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks