Recent content by Buderwuder

Being on them new batteries, mine are 6 years old. 😆

Do you any fenders for a M35A2, I see that you posted you have 2 1/2 ton parts but didn't say which one.

I'm in, my deuce needs some new batteries.

Any M35A2 cabs, or parts?

Well my fears were justified, the seal was in backwards, but all is not lost. I was able to carefully get it out and reverse it With very little trouble. Once reversed and installed the drum went on with clearance for the bushing and the keys. I am ecstatic, didn’t have to spend more money and...

I guess there are no specs, I will just be careful not to strip them out. Thanks everyone for sharing the wealth of knowledge and experiences.

These pics will help, I intend on working on it again this afternoon and let you what I find. thanks

When I put the oil seal in the end of the drum that goes to the drive end, I may have put it in backwards. When I put the drum onto the shaft and seat the seal, and go to install the sliding clutch keys on the other end of the shaft they will not go in, because there isn't enough room end to...

does anyone have a picture of the drum with the seal inserted correctly, that wood answer all my questions about the seals.

Is the seal to keep the oil in the housing from escaping and leaking onto the ground from the bushing, or is it to keep the oil in the drum from leaking out of the drum and onto the ground?

Thanks so much, I didn't know about this manual, but I have it now.

It appears that i have stumped everyone, or posted in the incorrect place.

It looks like I have stumped everyone, or I have posted in the incorrect place.

What is the correct way to install the oil seal in the drum on the worm gear/bull gear end. I have looked in the manuals and cannot find the right way. I already installed one with the spring side of the seal facing out or towards the housing when installed. I am beginning to believe this is...