Recent content by catamountinsp

Thanks B. !

Good morning, Is there a way to reduce voltage on the 60 amp generator on the 151A2? My voltage gauge is beyond the green section and into the red a bit. My concern is that its causing issues with my gauges (fuel, oil, and Temp) not working. Thank you in advance.

Need some help; My 151 engine surges and doesn't hold an ideal and I can't figure out why. I rebuilt the card with the soft rebuild kit and the engine has fresh gas. I have seen clips on YouTube reflecting the exact issue my engine has (but there were no comments)...

An MWO was mentioned in an older thread that I found selling a NOS mount still crated.

Looking for a copy of the MWO for installation of the M4 machine gun mount in the M151A2. I have already installed it into my M151A2 (once an MP Mutt so holes and supports where already present). I just want it for my reference . Many Thanks, RLTW

Thank you, Mike

Good Afternoon, Looking for pics of AN/VRC -47 routing and securing the cables to the matching unit and AUX receiver antenna (mounted on the side. I have the TM11-5820-401-10-1; however it doesn't depict the routing and securing of the cables. These radios will be fully functional so I want...

Another question; are all the stretcher support s the same or are they mirrored to accept the stretcher tracks? I only have one and need to fabric 2 more and my wielder wants to know if he has to wield the anchor brackets opposite of each other or the same side? Thank you in advance. Also...

Great Pics; much appricated. Would you mind taking a few of where it gets munted in the floor? I believe I have all the mounting hard where, I just dont know where it goes. How much would you like to pay for all six (I need to double check I actually have 6)? The shipping may be pricely do...

Much appreciated

Please send closer up pictures of the liter mount. I am in need of one and fabrication may be the only way ... TY

Sounds good; I only see one wire coming out the back of my 30 AMP fuse mount; does this mean circuit board is hot and the fuse gets its 12V from box it self or am I missing something? Thank you very much!!!!!

Got a problem I can't figure out. I installed LED head lamps over the weekend and now I have no lights (head lights, marker, brake, directional, or tail lights). My first knee jerk reaction was the the LED headlights did something to my lighting circuit; but I believe its possibly my BLK-OUT...

Any recommendations when the 30AMP main lighting fuse melts down? I believe I will need to rteplace the fuse box because of this. Cold my LED head lamps have caused this; they where just installed?