Recent content by Chitangi

  1. C

    Transmission wont engage in 5th gear

    Interesting … my mechanic has tried switching parts from the order transmission,the valve body and played around with the kick back cable nothing ,reassembled the entire transmission still no luck …something on the outside I’m guessing ,my head is fried !!
  2. C

    Transmission wont engage in 5th gear

    Wow ! I m not feeling the converter lockup would that cause the tranny not engaging in 5th ?
  3. C

    Transmission wont engage in 5th gear

    No kidding ugh !! I appreciate that input though .What are the possibilities of events going on …not really mechanically savy like you pros 😎
  4. C

    Transmission wont engage in 5th gear

    Hey guys trouble in paradise …my transmission wont go in 5th gear ,thought it was bad gear and clutches and all …changed all that ,oil clean inside out. I have noticed that I have no air coming to the transmission 😞😞 could that be causing it.I just lost a transmission which basically was cracked...
  5. C

    M939 Transmission not engaging after swap.

    Trouble in paradise ..had trouble with my transmission dropped and took a good one from another truck. trouble is, it stays in first gear and won't go pass that...first I thought It was the fluid ..checked out good. Checked the pipes, air supply line checked good. Ended up draining the tran for...
  6. C

    MEP-803A Generator won't start ..

    Thanks will do..
  7. C

    MEP-803A Generator won't start ..

    I have pretty much put every part I ordered together ..see pics .Though the challenge even after replacing water separator /secondary fuel filter priming and getting air out ..motor turn but wont crank ...checked the fuel lines at the injectors barely any fuel getting there ..loosened the Banjo...
  8. C

    MEP-803A Generator won't start ..

    Well said will do and actually the S17 just arrived ..about to jump on this baby .will keep you posted .
  9. C

    MEP-803A Generator won't start ..

    Thanks a lot and yes ..just couldn't get to it I thought I could quickly get it running ..however was gladly receiving some good info as well particularly adding the Fuse Block, Mod and getting the emergency switch installed .I have almost all the parts except the switch won't make it till...
  10. C

    MEP-803A Generator won't start ..

    Great help much appreciate ..still digging in today I was able to pick up some fuses and and fuse block from fuseco some company Norcross ga .I ordered some blue discs yesterday which should be getting help sometime weekend.I will be taking the cover off and look around per your recommendation...
  11. C

    MEP-803A Generator won't start ..

    Interesting and where does Quad fuse mod go ?thanks !
  12. C

    MEP-803A Generator won't start ..

    i finally hear the fuel pump ..and the dash is light omehow I was able to trun the motor from the main switch..im thinking airlock at this point trying to purge now ..any ideas would be appreciated.
  13. C

    MEP-803A Generator won't start ..

    well I merged the two wires on the emergency shut off and got some power finally to the panel and now trying to prime and hopefully it start will keep you posted
  14. C

    MEP-803A Generator won't start ..

    Makes sense possibly that ..its got two wires inside maybe try to link them..possible not sure
  15. C

    MEP-803A Generator won't start ..

    No actually it probably mothballed ...was a decent deal on govplanet ..so i took the bait.
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks