-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Coug's latest activity
-
CCoug replied to the thread New Acquisition, M1097R1 Helmet Top.Burning to the ground and internal damage to the start box are two different things. Plenty of documented cases on here of a keyed...
-
CCoug replied to the thread Fixing the 1998 HMMWV.common issue for wipers and washer fluid is the electrical connections under the windshield. If you aren't planning on folding the...
-
CCoug replied to the thread ON BOARD AIR?.there are plenty of 3D printed tool battery adapters out on the market. Then a smaller slave cable to the slave port, and that's all it...
-
CCoug replied to the thread ON BOARD AIR?.One thing to keep in mind is there really is a difference between a 20 volt lithium battery power and a 24V automotive system. That 20V...
-
C@Coug That's exactly what's happening. Appreciate the information.
-
CCoug replied to the thread ON BOARD AIR?.I don't know which ridgid air compressor you have had for over a decade, or what it's duty cycle rating is. The one linked above...
-
CCoug replied to the thread 200 amp alternator- No output, questions..Yup, my 200 amp worked intermittently for several months before I replaced it At the end the only way it would work was to shut off the...
-
CCoug reacted to Gutschken's post in the thread What have you done to your HMMWV today/lately with
Like.
Small update due to waiting for parts.... Installed a keyed battery cutoff switch in the fording switch location. Nice to have a small... -
CCoug reacted to FlameRed's post in the thread What have you done to your HMMWV today/lately with Like.
I often wonder why I subject myself to abuse trying to fix things I don't have a lot of experience fixing? I have been struggling to fix...
-
CCoug replied to the thread ON BOARD AIR?.The only rating I could find for the Ridgid was 16 scfm for the low pressure blower tube, but for the high pressure I don't see anything...
-
CCoug replied to the thread HMMWV M1097R1 specific.Engine is post 196900 serial number with the remote power steering reservoir, frame looks like early 3 speed, and if serial number...
-
CCoug replied to the thread 1996 M1097A2 Self induced charging issue.28-29V at the batteries is correct. The gauge is only really there for reference. As long as it's consistent and batteries are at...
-
CI had the same issue with my 802. I wanted something my wife could use . I ended up installing an interlock. The 802 will not run the...
-
CCoug replied to the thread Please recommend a transfer switch.Nice thing about overkill is it makes it easier to upgrade in the future if you need to.
-
CCoug replied to the thread Bringing non-runner M1165A1 REV back to life!.just in front of the fuel tank there are 2 check valves in short rubber sections of hose. Those are the ones that normally cause trouble.