Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Not specifically what -24P means, but reading through the TM it seems to be the parts diagram. The other TMs are operational and shop manuals. Am I correct?
Thanks
I am trying to find the NSN for the transformers in the static exciter board. I have the numbers on the parts themselves, but don't seem to be in proper format. I also thought the TM would have some specs for the transformers. I'm at a hurdle.
In TM 9-6115-464-34, page 3-271, item #'s 24,36,45...
Yes, I didn't check resistance. That's the reading I got with the base as cathode. The part # being 1N1009R, I found to be a reverse diode. I did not remove them, which I could.
Do I need to re coat the parts with anything when I'm done?
Thank you much
Doug
I did check the diodes and all 6 came in at an average of .42 for continuity.
Having pierced the coating to make contact, do I need to re-coat or repair the coating?
As I read the TM test procedure for the windings, I don't have the equipment, just a DMM.
I will check the other transformers in...
You Sir, are a fountain on knowledge! I could only hope to ever gain a portion of your knowledge and insight that you've displayed. Thank you!
K15 - No light
L0-L1 = 0v
L0-L2 = 0v
CR2 = 27v
S1-4 = 27v
S1-5 = 27v
S19-2 = 27v
S19-1 = 27v
CB1 = 27v both terminals
Battery, engine running = 27v...
Set running
Measure voltage @A5. - A,B,C
A&B 181.5V
B&C. 181.5V
A&C. 181.5V
Battery is quite old. I do measure 27.4vdc at battery, unit running.
The other higher dc voltage doesn't make sense to me either. For example, the hour meter doesn't run, but gets 40v on one terminal, 21 at the other...
RPMs adjusted. 182 at A-B, B-C.
When closing circuit, K1 contactor not closing. Switch S5 seems to function ok by continuity check. Trying to follow schematic to figure out why contactor not closing.
Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!