Recent content by DEL03

:confused: When I was in training at GM you were suppose to have a high of 60psi + or -5, then with engine warm no less than 11 + or - 5. now these were gasoline engines so I dont know that diesel would be any different. We have also built some HIPERF. Gas engines that once warmed had 90 +...

my 67 runs 90 at start up and right around 100 full bore at 43 MPH down the highway :roll: rollin of course with the multi fuel and diesel in the injectors.....good luck

:confused: OK Let me understand if I even out the weight front to rear better traction no digging currently we have about a 150-200 gallon empty water tank in the rear against the cab to this point we have never been stuck as long as the 6x6 was working, the problem the other day was high...

[thumbzup] Good Grammar come on I drive a Deuce to work and get it stuck just to test the limits! this way just in case I was to spend time actually using it I would know where to and not to go. I like the locker idea but my curiosty was if in a 14,028 lb truck if it worked the same as in the...

:nono: for a little more relizim we have the worst HOA but knew it before we moved here luckily we have a wonderful 7-11 down the street wich of course is where I was able to stick it the other day (deuce mod posi/spool) but either way I leave it there during the day and trade my Suburban for...

:banghead: YesterdayWe wanted to test our limits we live in florida and have installed the arb maunal shifter for the transfer case and until YESTERDAY we have never been stuck now Yesterday We wanted to know if we got got stuck that I could hook I the winch to my Suburban and pull myself out...

:roll: HAVE A M35A2 WORKING ON A SECOND WITH A DUMP BED :banghead:

Is it the grease seal or the oil seal the grease seal is 7521649 and the oil seal is 7061238 the phone number for memphis is 901-774-0600 good luck and dont forget the 3" nut socket it helps alot especially if you pull the drum with the wheels still intact DEL03

Try this on ebay we purchased 2 gallons of the deft military epoxy primer for $50.00, $61.00 after shipping we purchased a thirty dollar gun mixed with distilled water (yes water almost 3 gal) and we have a beautiful olive drab on my sons blazer [^] which of course we will be covering but if...

:roll: The kit was 485.00 the shipping was 20.00 and the tax was 41+- I really didnt understand the tax part but it showed up and its done I should also mention that we did buy seals not that they weigh much but they did make a difference in the tax Im sure good luck and remember it is so...

I was doing some diagnosis a while back on why we had no forward 6x6 engagement but had positive engagement in reverse :banghead: I thought we checked it all so we went and bought the manual shift (not the air)from MEMPHIS and after dissasembling the truck with just a couple interuptions, three...

:hop: THAT IS GREAT to know we have been using the Mobile 1 Gear oil since it came out in all of our other trucks and it has been awesome del03

I also just received my manual conversion for the replacemoent for the front sprag cant wait to do that but my plate also calls for go grade 90wt there I might try a posi additive though to thin it out a little so that I dont have the same problems as in the trani :deal: heres hoping for a...

Just till it started coming back out the hole in the center of tranni(next to the pto) my 67 states on the dash gl grade 90 wt that is what i was trying to go by del03

My question is I purchased 15 Gal of 90 wt like my placard says and changed all my fluids but now my trani is a little harder to shift so was it suppose to be sythetic or have an additive installed i have 15000 pages of literature but nothing that says go grade means what in civilian form...