Recent content by EagleWrench

as long as it is a 73-87 1500 the mount should fit other wise i totally agree with the above post. I ran across a couple of ADHOC mounts to say the least. if you run across a good plow you can always recoup bu selling what you dont need. I am goingto try and sell the 98 mount i got with my plow...

It was the #$%@&in battery. the front one. It had 12.72 volts HOWEVER when i put the screws to here an loaded iy up it failed miserably. The only thing i can think is when the GPR cycled it shorted the battery out producing the no power fault and pulling the formt eh rear battery which feeds the...

Electrical power issues still. Changed out ignition switch & starter realy, got power until the Glow plug relay cycled once and then everything went dead again. CHanged that this AM had all lights relay cycled on and off 3 times and thern no power again. Glows plugs probably have 20 starts on...

If you go to the western plow web page you can get all the Part numbers for new. I just found a western 7.6 for $1200 the mount for a CUCV cost $400-700 plus $50-60 for headlight harness, Unless you can find one that came off of one of these older trucks that is the deal. i have been looking for...

Thanks all it has to be battery thing with no power. I never touched battery connects at all. This truck was the bext kept truck i have seen even in with 22 years of kicking around infatry motor pools. Gonna clear the noodle with some bowhunting this morning. Thsi is the kind of problem people...

everything worked fine until iunbolted the Fuse box to work on the guts of the Heater fuse connectors. When i bolted it back up it started up once. I truned it off and then turn the key back on and all gauages just went dim to nothing, I have 12 volts in both Batt, I have 12v at junction block ...

Cool thanks Mike been looking for a QUICK tach mount for a western for a while. Found lots of plows but for the mount and wiring harness it was another $1K. So still looking. Catman thanks for the info if we (MV Owners ) had nothing before this law is better than not be able toown or operate...

WHAT kind of plow is that Mike? Mount OEM or FAB Looks AWESOME Quick Mount/tach?

reasons for operating Thanks everyone for the hints. My list started with "there is a noise in the drive train officer and i cant seem to find it. The Maint piece is a good one also. I will through the Armys Low usage program at them also. I like the hour a day !! As far as the DMV they called...

Hello from Sparta WI. My name is Jeff Wessels. I work on FT McCoy i am a retired AD 63Z, and a gov LOGGy bubba now. Just bought my first 1008 from the GL site here at FT McCoy. I was pretty excited until i found out WI changed the law OCT 10 and all MV must be plated with Historic plates...

War on MV folks I am new to SS site. I read some of the notes for new members on how some people would like to outlaw everything because we (VETS) gave them the right to do so. Well i do not know how many members are in WI. The rules of operating MV has changed for the worst. I purchased a CUCV...