Recent content by enfieldgene

hi NDT, I think I bought the seal cup from Torque King 4x4. Part # QU40072. they were expensive but I think they were about $80.00 a pair.

Hi, cleaned the rear bumper and painted it. I went and bought new bolts and nuts from tractor supply. In the last month I installed the rebuilt engine and bolted up the transmission. I'm still waiting for the drive shaft to come back from the driveline shop. The temps are rising but it is not...

NDT has a tank for me. I need to get time off to go get it. I want to do some sightseeing when I go. I looked all over the internet and could not find anyone who made the tank in plastic or steel. maybe someday they will but I don't think they do now.

the tank.

they had a plastic tank from the factory.

I am working on my M885 and the fuel tank was speared by the dreaded forklift. what options do I have to fix or replace the tank? any help would be appreciated.

in thanks

I was very surprised that the engine still had the poly timing gears. as you can see they were still in good shape. I have seen them in a thousand pieces all in the oil pan.:-(

I have been busy getting a little at time done. replaced the timing chain and cover, pulled the intake manifold,cleaned and painted it, installed the front brakes, and the rear brakes and drums. next on the list is running new brake lines. looks like international cast the block for the 318...

hi, what kits are you using? I still build kits every now and then. All the USAF trucks I was placed in were Strata Blue inside during my miss spent youth.

Thanks maybe tomorrow if it does not rain I will get them rotors on and back on the wheels.:beer:

Hello all, it's been a while since I have been able to work on the truck. the home owners assn. has been after me to clean up and complaining about the truck. I cleaned up the property and closed in the carport. thats the way life goes. I have a question about the rotors. I have looked at the...

what is the size for the screws for the plastic fuel tank? The fuel sending unit was rusted out and the screws were lost.

Did it work this time:?:

I picked up a wire harness from haywire and it has the new style fuses. I was under the bed yesterday and found only 2 bolts holding the bed on. the 2 bolt were loose. None of the other bolt hole line up. the bed needs to move about 1/2 inch forward. it should not be to bad to fix. The front...