Recent content by FLYWHEEL

Many thanks

Hi guys I was just wondering which air compressor you think is best, the twin or single cylinder , is there a difference in output and if they are interchangable . Many thanks, Mark.

Thanks for the reply , i will have to look and see if wix sells the seal separately as they are not supplied with the filters

Hi everyone, do you need to use a post seal on your wix 33336 filters when used on a fuel filter adaptor kit, as i see that fleetguard supply the extra post seal.

Ah o.k , i was thinking so the tailgate was vertical

With the bumper there you won't be able to fully lower the tailgate

Hi everyone, hope you are all well, I've been looking to get some spare innertubes for my truck, in the T.M.s they are listed as 9.00 x 20 with a TR 443 metal valve, unfortunatly i can't find tubes over here in the U.K. with that valve stem size. So my question is could i use a different valve...

I installed the gauges on the steering tube, using some light brackets

I also connected mine to the intake elbow, just had to remove the plug that was there.

Installed some extra 'blind spot' mirrors today, everything helps when driving a left hand drive truck over here in the U.K.

I'm thinking of doing this in the near future, can you reuse the fittings from the old filter or are they different. If so what fittings are required.

Thank you very much for your help

Are those adjustment nuts 1/2 inch

E.G.T and boost gauges fitted. Hopefully I will get time to do the bypass this weekend.

Thank you for your posts, very informative and helpfull