• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

Recent content by gajol

  1. G

    cooling water temperature

    that's what i was afraid of, but didn't know what it could be. thanks for the link, it helped me a lot.
  2. G

    cooling water temperature

    i tried the sealant at first and it didn't work. with paper sealant and gasket sealant it looks good so far.
  3. G

    What have you done to your CUCV today/lately - Part 2

    faulty fuel gauge: i have now replaced the fuel gauge and it works again. is it possible to repair the fuel gauge?
  4. G

    cooling water temperature

    here is a short update: i installed the thermostat and only sealed it with hylomar, that did not work. There was a big sourness. i have now sealed with two layers of paper seal and hylomar. it seems to work now.
  5. G

    What have you done to your CUCV today/lately - Part 2

    Yeah, that works. When I disconnect the cable from the sender the display shows full, when I connect this cable to ground the display shows empty. Thanks for the advice.
  6. G

    What have you done to your CUCV today/lately - Part 2

    My fuel gauge only shows half full when the tank is full. I have tested the fuel gauge 0 - 90 Ohm, works. I have renewed the mass. At the fuel gauge the 0 - 90 Ohm also arrive, think that the fuel gauge is defective and look now for a new one.
  7. G

    cooling water temperature

    Fortunately, the expansion worked out well. I ordered the thermostat directly from rockauto.com in the USA. I ordered on Saturday and the parts were with me in Germany today. That was really fast. The Aluminuim part is a bit warped and wants to do the sealing with Hylomar M. I am still waiting...
  8. G

    cooling water temperature

    thx for your hint. i will have a look for the thermostat. the radiator is new.
  9. G

    cooling water temperature

    Hello, i have exchanged the voltmeter for a temperature gauge. while driving the temperature sometimes went up to 230° F. What is the maximum temperature for the engine? Is that normal? Thanks for your advice.
  10. G

    Poll - Who has done the Doghead Relay Conversion

    i did it on my 1009. works great. thx.
  11. G

    Starter Problems M1009

    so here's a quick update: for all those who don't live in the usa and the purchase at napa doesn't work: the alternative relay is available at granit-parts. the part number for simplicity is identical. i guess i found the error: it was that a cable loosened on the battery pole. i replaced the...
  12. G

    Starter Problems M1009

    I just recently replaced the starter relay. I also checked the function of the new relay. I will keep an eye on it again. Many thanks for the useful links.
  13. G

    Starter Problems M1009

    Hello, first of all many thanks to everyone who is involved in this forum, without your help I often would not have been able to get ahead. I have a strange starter problem where I can't get any further. I've been trying to solve this for a year now without success. It started with the fact...
  14. G

    where does this part belong?

    Solved - Found it
  15. G

    where does this part belong?

    thanks for the advice. i'll check the Steering column to see if there's anything missing.
Top