Recent content by Green Junkie

Here are some photos for the oil filter adapter and spin on filter for reference. This is a great set up. Green junkie

I will try and post a photo of the spin on adapter for reference as they are a really nice addition to the mule.

How is the project going? Give me a call if you need anything and have fun with the mule. Bob

How is the project going? Give me a call if you need anything and have fun with the mule. Bob

The NAPA filters work or a FRAM CH1PL but both come with a flat rubber seal which do not work on the mule but you may try a large O ring. The trick is to find the oil filter assembly from the late Gen Set which is a direct replacement for the mule filter assembly but utilizes a spin on filter...

The NAPA filters work or a FRAM CH1PL but both come with a flat rubber seal which do not work on the mule but you may try a large O ring. The trick is to find the oil filter assembly from the late Gen Set which is a direct replacement for the mule filter assembly but utilizes a spin on filter...

I have the lower portion of the travel lock currently listed on SS and should have one of the braces to hold the travel lock to the bed if I can locate it. Bob Green Junkie 562 619-8557

Sorry to hear of your loss. I tend to deal in mule parts down here is socal. I also work on mules for those in the area. I will keep my eyes and ears open for any leads as I would hate to loose one of mine. Please feel free to contact me. Bob 562 619-8557

I have been able to straighten one out by just placing it in a large vice and tightening it down slowly with out any problems. Keep checking to see if the pin goes in smoothly. By the way I was able to do this with out heat if it was off just sightly. Let me know how it turns out Bob