• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

HDN's latest activity

  • HDN
    HDN reacted to Diego Tex's post in the thread M602, modified M35 with Like Like.
    This photo was of a friend who was Reo's driver when they were still active in the Brazilian Army. The M602s were towing artillery...
  • HDN
    HDN reacted to Diego Tex's post in the thread M602, modified M35 with Like Like.
    Good morning I've seen a case where a reo M35 that had a single braking system ended up failing and the driver found himself in...
  • HDN
    HDN reacted to gringeltaube's post in the thread Curious old M49 fuel truck with Like Like.
    Hey, glad if it helps! I kind of feel your pain because I did some modelling too, in my much younger years. It's always great when you...
  • HDN
    HDN reacted to Paweł's post in the thread Curious old M49 fuel truck with Like Like.
    @gringeltaube - thank you so much for the pictures and for the measurements! I'm glad you didn't mess with the hornets too much! I'm...
  • HDN
    HDN reacted to gringeltaube's post in the thread Curious old M49 fuel truck with Like Like.
    1) Before you start with that oil pan: Note that the deep sump continues full width, almost down to the bottom. 2) Front crossmember &...
  • HDN
    HDN replied to the thread M602, modified M35.
    I'm curious about the dual-circuit brake system. For the M35 trucks, a kit was made available to convert trucks from single-circuit to...
  • HDN
    HDN reacted to Diego Tex's post in the thread M602, modified M35 with Like Like.
    goodnight There is nothing left in a vacuum. An air compressor was installed, the same one that equips the Scania 111. As a result, the...
  • HDN
    HDN reacted to Paweł's post in the thread Curious old M49 fuel truck with Like Like.
    Hello everybody! I thought before cutting and gluing anything I'd make a quick drawing in 3D to sort everything out... Now I think...
  • HDN
    HDN reacted to Tracer's post in the thread Hello from Oklahoma with Like Like.
    Try Portrayal Press (Knowledge is Power) lots of different TMs. Hope this helps.
  • HDN
    HDN reacted to cavtrooper78's post in the thread Hello from Oklahoma with Like Like.
    I also wish I could get a set of paper TM’s for this thing. I just can’t seem to keep my train of thought with these digital ones.
  • HDN
    HDN reacted to cavtrooper78's post in the thread Hello from Oklahoma with Like Like.
    I hope yall are having a happy new year. Well I just dropped a buttload of cash (for me). I have 4 wheel cylinders, a brake line kit...
  • HDN
    HDN reacted to MarcusOReallyus's post in the thread Diesels and vacuum.... with Haha Haha.
    If it's like my vacuum at home, there's a lot more noise than suction.
  • HDN
    HDN reacted to kawkev's post in the thread Diesels and vacuum.... with Like Like.
    The motor spins at a high rate of speed using inertia to convert electrical energy into suction and noise.
  • HDN
    HDN reacted to Keith_J's post in the thread Diesels and vacuum.... with Like Like.
    (most) gasoline engines regulate power by regulating manifold pressure using a throttle valve. At part throttle, the engine is...
  • HDN
    HDN reacted to Tow4's post in the thread Diesels and vacuum.... with Like Like.
    In a gasoline engine you have either a carburetor or throttle body that acts as a valve to restrict the air flow into the engine. The...
Show older items
112,195members
165,985threads
2,337,034posts
829online users
Top