Recent content by hood297

Well i got them second hand from a friend. Like i said i used the solenoid that was installed on them when i got them and got the same result. The solenoid that came with them has the same input and output size as is on the truck Stock, just wasnt sure if there was something before the solenoid...

Well switched the solenoids, just for a couple tests. And no difference, guess it has to have more than 110-120 psi. Seems kinda odd. Think its that or a cfm volume issue?

well the air horns came with a solenoid valve about the same size over all with the same size fittings ect but 12v, so I was able to just swap the old one on my stock horns to these. So it wasnt designed for much bigger of a supply line and I know its got plenty on psi behind it, and it did the...

Hey guys, tried the seach forum and couldnt find much. I Am replacing the stock air horns with larger 3 trumpet horns, ive test rigged them On the truck and it just doesnt seem that loud, is there a pressure regulator on the air horn system limiting it? It just doesnt seem to be blowin' like it...

stretch, thank you! I'm sure that is where its coming from, because it gradually gets worse and worse. and Is only when the truck is running. Pulling off the entire fender huh? should be fun! And for the transfer case, I'm going to replace all of the seals anyway, and it very well maybe the...

ok, to update this I have fixed the freeze plug, but the engine oil is leaking much worse now. Here is a picture of where it is leaking, or near it. (red arrows) It is leaking a drop every 3 seconds or so.

Paid 1549 before the GL premium and taxes. around 1700 after. 1970-1 M35A1 with CARC in 97. Small amount of SURFACE rust on bed. Had no brakes so me, Wreckerman, and Frieghtrain (thanks guys) replaced the rubber brake line, and bled them out and now they are fine. (also gave me a chance to...

wow, I'm glad it was just a freeze plug for both of us. My stomach dropped when i saw coolant blowing out of the block. But when I saw the freeze plug i was a lil happier. and fortunately it is fairly easy to get to. use any sealant on it? I guess I'm just going to drain the cooling system...

Well it looks as though it rusted through, Im assuming this old of an engine had steel freeze plugs, and it finally developed a pin hole leak, or spray. I went and picked up a new plug and will try to get the old one out and new one in this afternoon. hopefully it is a 3/4" plug. It was the...

Hey guys, Been looking around the site for about a month now and have my first issues. Just got my first m35a1 by AM General. Wreckerman picked it up for me from redstone, and me, him, and frieghtrain spent the weekend changing fuel filters, bleeding brakes, and check fluids before I made the...

I'm not sure you can help me with this, but I only have the info that GL gave me in the paper work. I am not able to be at the truck until I plan to go pick it up, and will need insurance before then. DTID: W24CR382330001A MANF: US ARMY TANK AUTOMOTIVE COMMAND AMSTA-IM-MM U.S. PART #: 8736582...