Recent content by Ironhorse

I'm in

IN

IN

IN

Here's my math. 4224 panels at 240 watts each = 1,013,760 watts. I rounded off to 1,000 kw. 1,000 kw per hour for six hours a day = 6,000 kwh per day. Using my local residential rate of $0.12 per kwh; 6,000 kwh x $0.12 = $720.00 per day. 3.4 million divided by 720 = 4722 days or 12.9 years...

I've been trying to make out what's left of the bumper numbers on the 530B. What I've got looks like (----S 152) (AAMB 41). Any ideas ?

You're all welcome, glad I could help. If I knew it was going to be this popular, I should have negotiated for a commission on each unit sold from this thread. :doh:

I didn't mean to imply it was done by the shippers. I knew the damage was already there from the auction pictures. I'm guessing it was done when the truck was moved from where it was parked previously.

This being my first gasser, anybody have Napa numbers for the points, condenser and rotor ? Are they the same as the ones for the M37's, m38a1's, M151's, etc. ?

Frame and undercarriage look good. Fuel tank is completely rotten, pulled it today. Most of the compartment doors are rusted through next to the hinge but repairable. The hose reel compartment floors will need replacing but one of the doors is laying in the bed. The foam tank is missing. Also...

No problem. My goal was to keep it away from the scrappers also. I was looking at that data plate today. First one I've seen.

Don't know, first I have to get it to run. It cranks, but doesn't fire. I know I have power to the distributor. I'm going to check the plugs when I get a deeper deep well socket. The fuel tank is shot, three inch hole rusted in the top of it.

Got the new deuce home. It's a 1961 REO, first gasser for me.

Need the new toy hauled from Brandywine, WV 26802 to Frederica ,DE 19946.

Dump bed hoist kit complete with everything. M35A2 M813 | eBay Steel Soldier member. Good guy to deal with. Swapped several emails and a couple phone calls while installing.