Recent content by jblack6527

Thanks for the opportunity to get some awesome batteries!

Thanks for the recommendation, but they're basically on the other side of the state. Probably a 7 hour drive in a deuce.

No one?

Thanks!

I hope this is the right place for this, if not mods will you move it or let me know the best place for it? I have a truck that I think is in need of a total re-wire, or at least close. Is there anyone reputable close to Western NC that I could take it to and have them do it? I'll purchase a...

Please add me to the North Carolina membership map, Username: Jblack6527 Name: James Location: Weaverville NC Contact: Jblack6527@gmail.com

IN Thanks for the opportunity!

In! Thanks for the opportunity!

I didn't pull them one at a time, but tried it with no bulbs at all and it was the same way.

That's a great story. Goes to show no matter how often you do something, there's always room for "hurry up" error. I tried the ground cable idea with a set of jumper cables and the short alligator clip lead I had on hand. No change.

This is a good idea, I'll pick up a couple of alligator clips and make one of those up. I've done this, cleaned and ran the screws through a thread die, and a tap into the bucket threads. Wire brushed the brackets the lights bolt to and put a little grease on the threads and washers. The...

I do have that PDF, but what are you referring to as #69 and #96? I'm not seeing them in the PDF? And yes, lights actually illuminate. I figured it out seeing the reflection and funny looks from the car in front of me a couple days ago. Bought it from and individual, so who knows who was...

I've searched here, and just on Google for this and can find lots of guys with different problems, but none like this. If I've missed one, please link me to it. I have a new to me truck, and when you turn on the Right hand turn signal, everything operates as intended. Regardless whether...

I thought about that, but it just seems a waste to essentially throw away a set of sliders because of stripped bolts.

So I've searched and can find mention of people taking the sliders apart, but not how they did it. I have a new to me Deuce, and I took the seat frame off the sliders to replace the cushions, and the two rearmost studs were stripped off. I had a heck of a time getting the nuts off. I'd like to...