Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
How did you manage to get those 2 valves back in ? Taking the top cover off like in the manual gives only access to the rocker arms for checking and adjusting the valve clearance .... i think
I
Just read your post.... yes yes and yes, that sounds very similar to my issue, only that i do feel some air pushing out the line leaving the compressor, and when opening the drain cock on the air tanks, it "blows" some air out but indeed not with a whole lot of force.
Also with the intake and...
Goodmorning Barrman,
Thank you very much for shining a light where to serch.
The governor does not cycle, or makes any noise, So that will be the first thing i will open up and check.
Second i will also connect my home compressor to the emergency gladhand to fill the system up to 90psi and...
Hi guys, i have an 1954 m108 with oa-331 gasoline engine. I have no air leaks, air is everywhere it should be, it also holds air for long time, however here is the issue :
The pressure only goes barely till 30psi so way to little, can it be that the governor is stuck somewhere so pressure...
Hi guys,
Best wishes for 2025,
My question, the muffler on an m35 with oa-331 gasoline engine has 2 different diameters in connection. A big one and 1 that is significantly smaller. Is the small one the intake? And the big one facing the rear part tailpipe that exits between the rear wheels ...
Hi, yes, with the screws out you should be able to pull off the bottom part ( the part with the output line and the screen, and the magnetic disc or some sort sits also in that part...
I think you mean Pirmasens was that town. There are a number of nice photos on internet about that place back in those days. There is also a facebook page specificly for those who were stationed over there.
Hello guys,
i have a 6 ton semi trailer to put behind my m275a2 truck tractor. I am sanding the semi trailer at the moment and i find out that the trailer had many layers of paint, from woodland camouflage to some tan desert color paint. On the sides of the trailer, in the middle, left and...
it took many hrs and a lot off patience but i finally was able to convince her... hahahaha
the 5 tons (m62 international) were frequently used in belgium and the netherlands mainly for handling missiles like the honest john.
Hi guys, i purchased recently a studebaker m108 crane truck, 1954, still with the oa-331 gasser in it. Under the green paint i found some airforce blue but under that the entire truck is yellow, and i mean the entire truck, i've never seen trucks painted yellow when in service. Anyone can...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.