• Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!

  • Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.

 

Recent content by Knobby57

  1. K

    FLU419 SEE HMMH HME Owners group

    Would you believe I have one of these parts you need sitting in a file cabinet
  2. K

    FLU419 SEE HMMH HME Owners group

    I got every seal kit for flu 419 in a kit off eBay for around 450
  3. K

    FLU419 SEE HMMH HME Owners group

    Just to the right of the trailer brake air aviator is the actuator for the splitter . Air line on the left side and one on the top at the lower side of pic . The sensor in the top is for the display to let you know where it’s at . The sensor screw out . From where you are at you can pretty...
  4. K

    FLU419 SEE HMMH HME Owners group

    It’s under the drivers side on the trans . Be careful not to drop the nut plates on the back of the bolts . I forget what the clearance was supposed to be . It’s in the manual . To litle and you burn your clutch and too much it won’t release . It is almost impossible to bleed without a pressure...
  5. K

    FLU419 SEE HMMH HME Owners group

  6. K

    FLU419 SEE HMMH HME Owners group

    Expedition imports has them
  7. K

    FLU419 SEE HMMH HME Owners group

  8. K

    FLU419 SEE HMMH HME Owners group

    2 air lines go to the actuator and it just moves a fork . You can access this by pulling the plate around the shifter . The unit can lift off without tilting the cab
  9. K

    FLU419 SEE HMMH HME Owners group

    Finally got around to throwing in a new windshield
  10. K

    FLU419 SEE HMMH HME Owners group

    The actuator for the splitter is in the top of the case that sites between the bell Housing and the trans . Ill get a photo in a few
  11. K

    FLU419 SEE HMMH HME Owners group

    That is the valve . You need a decent amount of air to flow to make it work . If your axles are dumping too much are the controls for the split shift and 4/4 won’t operate . Try it in 2 wheel drive and see if that helps . If not pull the small line off the passenger side of the valve when your...
  12. K

    FLU419 SEE HMMH HME Owners group

    It’s air power .you probably have an air leak after the priority valve behind the trans on the frame t cross tube or the valve is stuck . This will also cause the 4 wheel drive switch not to do anything also . The electric is only for indicator lights .
  13. K

    FLU419 SEE HMMH HME Owners group

  14. K

    FLU419 SEE HMMH HME Owners group

    I actually need one of these . What will It cast me to ship to pa
  15. K

    FLU419 SEE HMMH HME Owners group

    Sorry I didn’t see this earlier . Before you tilt the cab . Mine got stuck between high and low in the splitter . My main tank was over 100 psi . There is a priority regulator/unloader on the frame beam crossover just behind the trans under the truck . This is to make sure you have air...
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website like our supporting vendors. Their ads help keep Steel Soldiers going. Please consider disabling your ad blockers for the site. Thanks!

I've Disabled AdBlock
No Thanks