Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
Microsoft MSN, Live, Hotmail, Outlook email users may not be receiving emails. We are working to resolve this issue. Please add support@steelsoldiers.com to your trusted contacts.
Ray70 was correct. One of the field wires was chewed through. It was a pretty easy fix.I cleaned up all the rodent mess while I was in there.
Once everything was cleaned up - I tested the unit and....it worked perfectly
I went through everything again -
MPU reads between 2 and 3 VAC per the TM
I checked all the relays - they are good per the TM
K15 opens when S1 is in start
As stated previously voltage regulator terminals 5 and 6 momentarily show just over 19 VDC momentarily and then nothing
S14 - is this the...
I checked out my “bad” duel float and indeed it’s not bad. I just picked up another 802a last week and it had the same issue. Both are tier 2 resets that never saw use. Both sitting at 2.2 hours which was what they were at after the reset. This time I took off the panel and loosened the nut...
I have a mep 802a with 3 hours on it. Everything looks brand new. I fired it up and it shows no electricity being produced. Convenience outlets show 33.7 volts and lugs show 33.7 volts. Had anyone seen this issue before?
I agree - it would be a hard business. I just have an extra I'm thinking about getting rid of. You know how it is - I bought one for the house and the next thing you know - I have generators everywhere. :doh: