-
Steel Soldiers now has a few new forums, read more about it at: New Munitions Forums!
M1009_SPAIN's latest activity
-
M1009_SPAIN replied to the thread Help gen1.Yes, I'll do that with this one, and buy some. A friend I have in the US can send them to me. Thanks for everything. -
-
M1009_SPAIN replied to the thread Help gen1.I cut the cable 2cm below the broken piece, above the black cylinder, connected the multimeter in continuity mode and it started to...
-
M1009_SPAIN replied to the thread Help gen1.The wirecable 20 is broken, I just disassembled it and 5cm from the black cylinder it is broken, a part of the plastic holds it. Am I...
-
M1009_SPAIN replied to the thread Help gen1.I understand it's not just a wire, what are you referring to...
-
M1009_SPAIN replied to the thread Help gen1.I understand. I think the original wirecable with 20 refers to AWG 20. The one I bought for installation is equivalent in the US to AWG...
-
M1009_SPAIN replied to the thread Help gen1.Indeed, the black plastic, which you say is a fuse, has a 20V rating. I've looked at it closely, and the color change looks like dirt...
-
M1009_SPAIN replied to the thread Help gen1.This is the unconnected wire, which is red and comes out of the white connector on the exciter and turns orange when it reaches the...
-
-
M1009_SPAIN replied to the thread Help gen1.Okay, I'll run a new wire from the firewall fuse where the exciter wire starts to the alternator bolt. the red wire turns orange and...
-
M1009_SPAIN replied to the thread Help gen1.@Tow4 Or do you have any other idea? Thanks to your post, I tested the circuit and found the fault in the red exciter wire. Would you...
-
M1009_SPAIN replied to the thread Help gen1.I tested it, and the alternator works. After checking that it was generating 14.8V, I connected a jumper cable from the red wire of...
-
M1009_SPAIN replied to the thread New to forum, new m1008 owner, GEN 1 issue..Is your gen 1 ok? How did you fix it?
-
M1009_SPAIN replied to the thread Help gen1.I checked it, cleaned it with a wire brush, cleaned the cable connector... that's why I said I'm out of ideas.
-
Hi guys, I need help with my M1009 and the damn Gen1. I had my Gen1 rebuilt when the light came on, and I verified it wasn't a blown...
-
M1009_SPAIN reacted to Sharecropper's post in the thread What have you done to your CUCV today/lately - Part 2 with
Like.
Got the intercooler mounted and partially plumbed. I used a Hayden #1268 with a BTU cooling capacity of 31,200. -
M1009_SPAIN reacted to Sharecropper's post in the thread What have you done to your CUCV today/lately - Part 2 with Like.
Got all the ancillary systems completed on the driver's side of the new drivetrain prior to re-installing the inner & outer fenders next...
